Planer Jointer Seals and Gaskets

Fix Number

FIX10142022

Manufacturer Part Number

213960-9

O-rings are designed to contain thousands of pounds of pressure by creating a seal between two or more parts. O-ring measurements are defined by the inside diameter and the thickness. There are many causes for O-Ring failure, such as pressure, friction, temperature or chemicals. The most common are: • <u>Extrusion and Nibbling</u> • O-ring has ragged, tattered edges. These are commonly caused by pressure spikes which shear off tiny "bites" from the o-ring, or caused by clearance gaps. • <u>Abrasion</u> • One or both sides of the o-ring appear rough and slightly flattened. Commonly caused by a contact surface that is too rough, contains grit or is too smooth to allow lubrication. • <u>Over Compression </u> • O-ring is flattened on both sides and may have a "ring" split along its length. Commonly caused by excessive pressure or heat. • <u>Heat Hardening</u> • O-ring has a pitted or cracked surface, and often is flattened on both sides. Caused by temperature exceeding o-ring capacity. • <u>Weather/Ozone Cracking</u> • O-ring is covered in small surface cracks. Caused by exposure to ozone, UV rays and air pollution. Excessive seal stretching causes similar cracking.

Fix Number

FIX10168635

Manufacturer Part Number

285923-00

This part is available as an individual replacement and helps to create a seal. The gasket plate attaches to the guide plate and is made of a reflective metal. A screwdriver and a wrench set may be needed during the replacement process. It will need to be replaced if it becomes broken. This is a genuine DeWALT replacement part that is sourced from the original manufacturer for use with planers.

Fix Number

FIX10141886

Manufacturer Part Number

213445-5

This is a genuine Makita replacement part that has been sourced from the original manufacturer to be used with angle grinders and die grinders. The o-ring is commonly used to seat and support the drive gear bearing assembly. This item is sold as an individual replacement part.

Fix Number

FIX10168683

Manufacturer Part Number

285975-00

This authentic replacement part is specially manufactured for DeWALT planers. The purpose of this part is to create a tight seal between connected pieces, over time the material may wear out and begin to crack eventually requiring a replacement. Please note this high-quality foam dust seal is sold individually. Make sure to refer to the appropriate diagrams of your model for the correct location and application of this part.

Fix Number

FIX10459823

Manufacturer Part Number

6284846

This is an authentic Powermatic replacement part that has been sourced from the original manufacturer to be used with helical or spiral cutter head planers. The gasket is used to seal the connection between the gearbox and the cover for the box. This gasket is available as an individual replacement part.

Fix Number

FIX10168685

Manufacturer Part Number

285977-00

It is a genuine item that is supplied by the original equipment manufacturer for use with DeWALT planers. This is a special component that helps to provide a tight seal for the dust container, unfortunately, over time the material may wear out, get damaged or lost eventually requiring a replacement. Keep in mind this high-quality part is made of durable material and is sold individually. Please make sure to refer to the appropriate diagrams of your model for the correct location and application of this component.

Fix Number

FIX17079088

Manufacturer Part Number

34-40-0003

Fix Number

FIX17079087

Manufacturer Part Number

34-40-0002

Fix Number

FIX10141720

Manufacturer Part Number

213008-7

This is an authentic Makita replacement part, sourced from the original manufacturer for use with screwdrivers, plate joiners, and pneumatic nailers. The special o-ring is used with several different types of equipment and the application of the o-ring can vary based on the model of the power tool. This o-ring is available as an individual replacement part, please see model diagram for associative parts.

Fix Number

FIX10460980

Manufacturer Part Number

6292760

This is an authentic replacement part that is sourced from the original manufacturer for use with planers. The oil seal is commonly used to fill the space between the gear shaft and the gear box housing. This replacement part is available individually, please note two may be required.