Pipe Tools Wheels and Rollers

Popular Pipe Tools Wheels and Rollers

Axle
$6.15
In Stock
Fix Number
FIX10128342
Manufacturer Part Number
42-12-0210
Cutter Wheel
$12.81
In Stock
Fix Number
FIX10095703
Manufacturer Part Number
33185
This Authentic Manufacturer Sourced replacement part is designed for use with Ridgid Tubing Cutters. It is precision-machined from high-grade steel and engineered for long life and maximum cutting accuracy. Designed to cut Aluminum and Copper. To replace this part you will need a Screwdriver. • Loosen the Screw that holds the Cutter Wheel • Remove the Old Cutter • Make sure the Cutter Body is clean • Place a New Cutter Wheel in place and secure it with a Screw.
Copper Cutter Wheel 2 Pak
$21.26
On Order
★★★★★
★★★★★
1 Review
Fix Number
FIX10133905
Manufacturer Part Number
48-38-0010
This copper cutter wheel is supplied by the original manufacturer for use in copper tubing cutters. Each pack includes two wheels. The cutter wheel is a circular steel blade with a black oxide finish, specifically designed to slice through copper tubing. It has a sharpened edge and a hole in the middle, which is mounted onto the adjustable spindle. The wheel allows for clean and accurate pipe cuts by clamping the cutter onto the pipe and rotating it until the pipe is severed. Over time and with frequent usage, the copper cutter wheel may become dull, crack, or become dislodged. When the cutter wheel fails, it will result in uneven or rough cuts, damage to the pipe or it may not cut at all. To remove the faulty wheel, you will need to disassemble the cutter head assembly. Remove the old wheel and insert the new wheel in the same orientation. Secure it in place with the appropriate fasteners and reassemble the cutter head assembly.
F-514 Cutter Wheel Thin
$16.35
In Stock
Fix Number
FIX10095687
Manufacturer Part Number
33100
This is a genuine Ridgid replacement part used in compatible bolt threading machines. The thin cutter wheel attaches to the cutter frame and helps to make cuts in pipes. It is made out of metal and will require replacing if it breaks. This item is priced individually.
Cutter Wheel
$32.99
In Stock
Fix Number
FIX10095690
Manufacturer Part Number
33125
It is an authentic OEM component which is made for Ridgid pipe and bolt threading machines. This special cutter wheel is designed to cut steel and ductile iron. A dull or a damaged cutter wheel will increase required force, produce poor results and increase the risk of injury. On a monthly basis (or more often if needed) lubricate all exposed moving parts (such as carriage rails, cutter wheels, cutter feed screw, jaw inserts and pivot points) with a light lubricating oil. Wipe any excess oil from exposed surfaces. It provides an identical replacement for a faulty or a missing component that was installed on a new unit. Note, this high-quality cutter is made of durable metal and is sold individually.
Cutter Wheel H.d.
$23.86
In Stock
Fix Number
FIX10095688
Manufacturer Part Number
33105
Cutter Wheel
$36.65
In Stock
Fix Number
FIX10097210
Manufacturer Part Number
44185
It is a genuine component which is supplied by the original equipment manufacturer for Ridgid pipe and bolt threading machines. This special cutter wheel is designed to cut steel and ductile iron. A dull or a damaged cutter wheel will increase required force, produce poor results and increase the risk of injury. On a monthly basis (or more often if needed) lubricate all exposed moving parts (such as carriage rails, cutter wheels, cutter feed screw, jaw inserts and pivot points) with a light lubricating oil. Wipe any excess oil from exposed surfaces. It provides an identical replacement for a faulty or a missing component that was installed on a new unit. Note, this high-quality cutter is made of durable metal and is sold individually.
Wheel, Cutter E2558 Thin
$16.23
In Stock
Fix Number
FIX10095698
Manufacturer Part Number
33170
This is a genuine Ridgid replacement part that has been sourced from the original manufacturer to be used with internal tubing cutters. The metal cutter wheel attaches to the roller cage and is used to cut through the tubing. The cutter wheel is sold as an individual replacement part.
Cutter Wheel, E-2191
$21.23
Special Order
Fix Number
FIX10095699
Manufacturer Part Number
33175
The cutter wheel attaches to the spring and arbor. This is an OEM part sourced directly from the manufacturer and used in Ridgid copper cutting prep machines and tubing cutters. It is made of metal and is sold individually. A screwdriver and a set of pliers might be necessary during the installation of this item. Over time this part may break or become dull and will need to be replaced.
Roller Carriage Assembly
$17.45
In Stock
Fix Number
FIX10130516
Manufacturer Part Number
43-72-0285

Pipe Tools Wheel or Roller Brands