OEM Wagner Paint Sprayer Parts & Accessories

Separating Oil

$7.65

Fix Number: FIX10505229
Manufacturer Part Number: 0516913A

It is an authentic item that supplied directly from original equipment manufacturer for use with Wagner pumps. Lubrication is a must for any piston pump if you want your equipment to last. It is recommended to squirt some before each use, it is also may be a good idea to squirt a bit in the same spot before storing the unit away. Please note this four Oz. bottle of separating oil is sold individually.

Spring

$7.65

Fix Number: FIX16980334
Manufacturer Part Number: 16101

This is a genuine manufacturer sourced replacement part designed for use with Wagner paint sprayers. This is a spring for the piston. It is made out of metal and it is sold individually. No tools are needed to replace this spring.

Duckbill Valve

$6.51

Fix Number: FIX12058174
Manufacturer Part Number: 0271434

Genuine Wagner replacement part, this item is sold individually. This part acts as a valve, allowing the paint in the Powered Paint Roller to only flow in one direction and not back up. This part does wear out, having on or two extra may be a good idea.

Suction Tube

$6.51

Fix Number: FIX10505121
Manufacturer Part Number: 0414363

This is a genuine OEM sourced replacement part designed for use with Wagner sprayers. This suction tube fits inside the container and it delivers paint to the spray gun. It is made out of plastic and it is sold individually. No special tools are needed to replace this tube, simply take out the old one and replace it.

Ball, 6mm Carbide

$28.55

Fix Number: FIX18214512
Manufacturer Part Number: 93635

Spring, Outlet

$6.79

Fix Number: FIX18199844
Manufacturer Part Number: 47485

This is a genuine OEM sourced part which is specially designed for use with SprayTECH and Wagner sprayers. It is an identical replacement for a missing or a faulty outlet spring that was installed on a new unit. The part is utilized to apply tension on the ball that sits in the valve seat. Please make sure to refer to the appropriate diagrams of your model for the correct location and application of this hardware. Keep in mind this high-quality component is made of durable metal and is sold individually.

Seal And O-ring

$5.95

Fix Number: FIX18201467
Manufacturer Part Number: 514112

This is an Authentic Manufacturer Sourced replacement part designed for Wagner Paint Rollers. These items provide an Air-Tight Seal for the Roller Arm Assembly. Over time O-Rings will shrink, become brittle and crack allowing for air leaks. At that time they should be replaced. These rings and a seal are made out of Rubber. Replacing this item you would need Pliers or a tool to remove the old O-Rings.

Suction Set

$75.00

Fix Number: FIX17016593
Manufacturer Part Number: 516197

This replacement part is supplied by the original manufacturer and is designed for use with sprayers. The purpose of this suction set is to supply the material from the tank to the unit. Over time it may deteriorate and become brittle eventually requiring a replacement. Check the appropriate diagrams and the owner\\\'s manual for your model for the correct application. Note, this high-quality suction set is sold as an individual item.

Disc, Retainer-pm

$6.51

Fix Number: FIX18196212
Manufacturer Part Number: 284395

This is a retaining disc for various powered paint rollers. This disc is a small, round piece of durable plastic that fits on near the end of the handle shaft to secure the duckbill valve and suction fill tube. This retainer disc is an individually sold OEM part, meaning it does not come with any other parts or hardware for your paint roller. This disc fits in between the duckbill valve and the locking cap and features a 1-inch diameter. If you notice the suction tube for your paint roller remains unseated within its respective port, or if the suction is poor, consider inspecting and replacing this disc. To replace this disc, ensure there is no paint within the handle of the paint roller, before unthreading the locking cap on the suction port. Once the locking cap is removed, disconnect and remove the retainer disc and replace it with the new disc.

Container Seal

$6.51

Fix Number: FIX17016773
Manufacturer Part Number: 417341

The container seal is a genuine item that is supplied by the original equipment manufacturer for use with Wagner paint sprayers. It fits between the spray gun assembly and the suction tube. The seal is made of a thick Styrofoam and helps to keep the paint from leaking out of the spray gun. This item is sold individually.

Wagner Paint Sprayer Parts

Popular Wagner Paint Sprayer Parts

Wagner Paint Sprayer Appliance Types

Related Wagner Paint Sprayer Parts

Popular Wagner Paint Sprayer Models

Wagner Paint Sprayer Parts

Start With Your Model Number

Popular Wagner Paint Sprayer Parts

Wagner Paint Sprayer Appliance Types

Related Wagner Paint Sprayer Parts

Popular Wagner Paint Sprayer Models