Paint Sprayer Valves

Fix Number

FIX12058174

Manufacturer Part Number

0271434

Genuine Wagner replacement part, this item is sold individually. This part acts as a valve, allowing the paint in the Powered Paint Roller to only flow in one direction and not back up. This part does wear out, having on or two extra may be a good idea.

Fix Number

FIX10053434

Manufacturer Part Number

V-215100AV

This ASME safety valve is constructed of high-qualty metal, and is made for use with many air compressor models. Fastened to the manifold, the safety valve diminishes air pressure when the pump is not shut off at the proper setting. This important component is sold individually. A screwdriver, adjustable wrench and a pair of pliers are often necessary for the removal and replacement. Please refer to the specific manual for additional repair information.

Fix Number

FIX16863669

Manufacturer Part Number

17P174

★★★★★

★★★★★

1 Review

Fix Number

FIX10053848

Manufacturer Part Number

VS001800AV

This is an authentic part that is supplied directly from the original equipment manufacturer for use with Craftsman Air Compressors. The exhaust flapper valve attaches on the valve plate under the cylinder head. The most common reasons for replacing the flapper valve is if there is poor performance, or the air leaks out of the intake air filter while the unit is running, damaged/sticking valves is a common issue when you have low compression, and can also cause the motor/engine to stall and too much pressure in the pump's crankcase. This part is sold individually. Here is a list of tools that are needed to install the flapper valve are a screwdriver, socket wrench, and a wrench.

Fix Number

FIX12054797

Manufacturer Part Number

759-379

Fix Number

FIX10161092

Manufacturer Part Number

224807

This is an original manufacturer-sourced part which is designed for Graco sprayers. The base helps to secure the drain valve. If it is missing or is damaged, it will provide an identical replacement for the original component that was installed on a new unit. Refer to the owner's manual and the appropriate diagrams for the correct application and replacement procedure. Note, this high-quality valve base is made of a durable plastic and is sold individually.

Fix Number

FIX18196089

Manufacturer Part Number

278242

Fix Number

FIX18202749

Manufacturer Part Number

555850

This is an authentic SprayTECH replacement part. The valve assembly is used in SprayTECH paint sprayers to control the flow from the paint pump. This kit contains a metal spring, a nut, a lock washer, a nozzle, a retaining nut, a valve, a plastic knob and housing, and lubricating gels. You will require a wrench to replace this item.

Fix Number

FIX10497555

Manufacturer Part Number

700-258

This authentic item is supplied directly from the original equipment manufacturer for use with sprayers made by Titan. The spray by-pass valve connects to the filter plug. It might require a set of pliers and a wrench to replace this part. It may become broken and will need to be replaced. This part is made of metal and plastic and is available individually.

Fix Number

FIX16667634

Manufacturer Part Number

210G-K50