Nailer Springs and Shock Absorbers

Fix Number

FIX18992774

Manufacturer Part Number

H30608

This is a Genuine OEM sourced replacement part designed for use with Bostitch Staplers. This Spring connects the Pusher and the Top Guide of the Magazine. It is made out of Metal and it is Sold Individually. To replace this spring you would need pliers.

Fix Number

FIX12397982

Manufacturer Part Number

149859

This is a single OEM feed pawl spring for a nailer. This part holds the check pawl tightly against the nails, allowing it to feed correctly. The spring is known to weaken over time, which causes play in the pawl, leading to nail feeding problems. For this quick and easy repair, you may require a punch, pliers, and a screwdriver.

Fix Number

FIX18997128

Manufacturer Part Number

P0800002932

This is a genuine Bostitch replacement part. The Safety Pad is attached to end of the safety to prevent the material that it is being used on from getting marred or dented by the safety arm. It is a advisable to have one or two extra pads on hand as they do have a tendency to crack and deteriorate over time.

Fix Number

FIX12425944

Manufacturer Part Number

180447

This is a genuine OEM sourced part that is intended to be used with pneumatic nailers and staplers from Bostitch, Porter Cable, and DeWalt. The metal spring is used to provide compression between the piston head valve and the end cap assembly. This item is sold as an individual replacement part.

Fix Number

FIX12529655

Manufacturer Part Number

N80120

The torsion spring attaches to the feed pawl. This is an authentic part from Bostitch for use in nailers. The spring is made out of metal and is priced individually. This part will need to be replaced if it becomes broken or bent. A socket set, a set of pliers, and a screwdriver may be needed during the installation process.

Fix Number

FIX12455360

Manufacturer Part Number

854011

The metal compression spring is made of metal and goes between the check pawl and the door. This part is available as an individual replacement and is an OEM replacement part from the manufacturer Bostitch for use in nailers. Springs can lose their tension over time and will need to be replaced. A set of pliers and a socket set may be needed when replacing this spring.

Fix Number

FIX12401001

Manufacturer Part Number

174095

Help keep your nailer feeding smoothly and reliably with this pusher spring assembly, a critical component that applies constant tension to the nail pusher and advances nails from the magazine to the driver blade. A worn or damaged spring can cause feeding issues, skipped nails, or inconsistent performance, making replacement an important part of maintaining proper tool operation. Designed for dependable tension and smooth fastener delivery, this spring helps ensure nails are consistently positioned for firing. Replacing the assembly typically involves removing the magazine, transferring the new spring to the pusher mechanism, and reinstalling the components. Because feed system designs can vary between models, refer to your tool's parts diagram or service manual to confirm the correct installation location before assembly.

Fix Number

FIX18992777

Manufacturer Part Number

H30615

Fix Number

FIX18979740

Manufacturer Part Number

115143

This authentic OEM sourced replacement part is designed for use with Bostitch nailers. It provides spring action for the magazine. It is made out of metal with a plastic hub and it is sold individually. To complete this repair you would need a screwdriver.

Fix Number

FIX18987992

Manufacturer Part Number

904701

It is an authentic OEM component which is made for Porter Cable nailers. This spring applies tension on the trigger allowing it to retract. If the spring is stretched, damaged or lost, this part will provide an identical replacement for the original hardware that was installed on a new unit. One durable metal spring is included. Replacing it is a simple task that should not require any special tools. Check the appropriate diagrams for your model to ensure the proper repair procedure.