Nailer Hoses and Tubes

Fix Number

FIX18987857

Manufacturer Part Number

897554

This is an OEM single nose cushion for a stapler. This small black plastic nose cap is attached to the end of the pushing lever, to help protect the working material from getting damaged by the pushing lever. We recommend having a few extra on-hand, as they tend to be a common replacement part due to regular wear and tear. To install this part, place the open part of the cushion towards the front of the stapler and pop it into place, no tools needed for this simple replacement.

Fix Number

FIX18982190

Manufacturer Part Number

5140091-78

This is genuine OEM sourced replacement part designed for use with Porter Cable nailer. The nose cap is attached to end of the safety element to prevent the material that it is being used on from getting marred or dented by the pushing lever. It is a advisable to have one or two extra on hand as they do have a tendency to crack and deteriorate over time or simply get lost. This part is made out of plastic and it is sold individually. To replace this item you do not need any tools, simply slide it on the safety elements end.

Fix Number

FIX18987549

Manufacturer Part Number

886137

This is an OEM safety pad, also known as a probe pad or nose cushion. It attaches to the end of the safety to stop your work piece from getting damaged by the safety arm. It is sold individually, however, we recommend having a few of these on hand as they tend to weaken over time. No tools are necessary, it simply pops into place by hand.

Fix Number

FIX18988001

Manufacturer Part Number

904725

This is an Original OEM replacement part designed for use with Porter Cable Nailer. This part is made out of Plastic and it is Sold Individually. The Nose Cap is attached to end of the Safety Element to prevent the material that it is being used on from getting marred or dented by the pushing lever. It is a advisable to have one or two extra on hand as they do have a tendency to crack and deteriorate over time or simply get lost. To replace this item you do not need any tools, simply slide it on the Safety Elements end.

Fix Number

FIX10156939

Manufacturer Part Number

HY00000378

The nose adapter is a genuine Makita replacement part that has been OEM sourced to ensure a high level of quality. This item is intended to be used with brad nailers. This part attaches to the contact arm and is used to provide a stable connection between the contact arm and the material being nailed. This part also prevents marring on the surface of the trim being fastened. This part is sold as an individual replacement part.

Fix Number

FIX12522621

Manufacturer Part Number

N252499

Fix Number

FIX16602321

Manufacturer Part Number

424121-8

Fix Number

FIX18987607

Manufacturer Part Number

887249

This replacement nose cushion also known as a no mar pad is an authentic OEM sourced item. It is specially designed for Porter Cable round head framing nailers. It is attached to the safety element to prevent the material from getting dented. Please note, this plastic item is sold individually.

Fix Number

FIX10072835

Manufacturer Part Number

GB0304

This is the feeder assembly for various staple gun models. The feeder assembly is responsible for constantly pushing the staples forward to be used within the nose piece. This feeder assembly is comprised of a plastic housing with a recoil spring and connecting cable. This assembly is sold as an individual OEM part and does not come with any other hardware or accessories. If the cable or recoil spring within the feeder assembly are broken or worn out, it needs to be replaced in order for your stapler to work properly. Replacing this feeder assembly only requires a wrench, Allen-key, flathead screwdriver, and punch.

Fix Number

FIX18987850

Manufacturer Part Number

897384

This nose cushion is specially designed for use with Porter Cable nailers. It is a genuine part that is supplied directly from original equipment manufacturer. The nose cap is attached to end of the safety element to prevent the material from getting marred or dented by the pushing lever. It is a recommended to have a few extra on hand as they do have a tendency to crack or deteriorate over time or simply get lost. This part is made out of plastic and it is sold individually. To replace this item you do not need any tools.