Nailer Handles

Fix Number

FIX18981506

Manufacturer Part Number

5140030-10

This trigger is a genuine replacement part sourced for use in Porter Cable nailers. This is a single sequential trigger that replaces bottom fire (AKA contact) trigger. Single sequential triggers greatly reduce injury. They cannot be used for bump/bounce nailing since trigger must be released and then reactivated in order to fire. One (1) trigger and its two (2) pins are included. Note that both pins can be purchased separately as part # 883945 (smaller rolled pin) and part # 883884 (larger rolled pin).

Fix Number

FIX10171499

Manufacturer Part Number

392243-00

This part includes one band for a nailer. It is sourced right from the original manufacturer, to ensure the highest quality replacement part. The band is part of the return system for the driver. Your tool will have two of these bands, however they are sold separately. It is common for the band to stretch or wear over time and require replacing. It is recommended to replace both the bands at the same time.

Fix Number

FIX10072924

Manufacturer Part Number

GC0444

Make reloading your tool quick and convenient with this feeder shoe handle, a durable metal component that allows you to easily retract and hold the spring-loaded feeder mechanism while loading fasteners into the magazine. Weighing approximately 32 grams, it helps ensure smooth magazine operation and comfortable handling during routine use. Replacing a worn, bent, or damaged handle can help restore reliable fastener loading and keep your tool operating efficiently. Installation typically involves removing the existing handle from the feeder shoe assembly and securing the replacement component in its original position.

Fix Number

FIX10073583

Manufacturer Part Number

HC0653

This is an authentic replacement part manufactured for use with Senco pneumatic staplers. The trigger assembly is used to actuate the trigger valve assembly. This plastic trigger is available as an individual replacement part, please see model diagram for associative parts.

Fix Number

FIX18987862

Manufacturer Part Number

897872

This is an authentic OEM part guaranteed to fit Porter Cable staplers listed below. This piece is the tool's main control trigger. Other pieces that are used with this part include trigger pin kit (part # 897561) and urethane retainer (part # 890725). The trigger is held onto the tool by a trigger pin, which is held in place with a urethane retainer. All parts sold individually.

Fix Number

FIX18981505

Manufacturer Part Number

5140030-09

This is an OEM replacement part guaranteed to fit Porter Cable nailers listed below. It is a bottom fire contact trigger used in place of a restrictive (AKA single sequential) trigger. This trigger can be used for bump/bounce nailing, which is when trigger is kept pulled so that nails are released as the gun's nose is pressed. Use caution when nailing with this type of trigger, as contact style nailers are much less safe than sequential nailers. This trigger is sold individually with no additional pieces.

Fix Number

FIX10412360

Manufacturer Part Number

CN35714

This is an authentic Max replacement part. When the trigger is pulled a nail leaves the magazine and the driver punches it into the surface the head of the nail gun is pressed against. The trigger is attached to the frame of the nail gun with spring pins, and it is sits on top of the trigger valve assembly. This is a replacement trigger, if yours is damaged or broken this part is the fix you need. The replacement trigger is simple to install, remove the old trigger by releasing the spring pins, put the new trigger in its place and put the spring pins back in.

Fix Number

FIX10073411

Manufacturer Part Number

HC0148

This is an authentic replacement part manufactured for Senco pneumatic fasteners. The plastic trigger is used to actuate the trigger valve assembly when firing the fasteners. This trigger is available as an individual replacement part, please see model diagram for associative parts.

Fix Number

FIX18980142

Manufacturer Part Number

174269

It is a genuine item that is supplied by the original equipment manufacturer for use with Bostitch nailers and staplers. This is an identical replacement for a missing or a faulty trigger that was installed on a new unit. The part provides a user with a comfortable grip for operating the switch, please make sure to refer to the appropriate diagrams of your model for the correct application of this component. Keep in mind this high-quality trigger is made of durable material and is sold individually. Note, the <a href="http://www.ereplacementparts.com/pinspecial-p-403091.html" target=blank><u>#174268 Pin, Special</u></a> utilized to secure the trigger is sold separately.

Fix Number

FIX18980358

Manufacturer Part Number

195309