Multi-Tool Hardware

Fix Number

FIX16398265

Manufacturer Part Number

692512002

This is a round metal sleeve with an approximate diameter of 3/4-inches, with a beveled centre with a 1/4-inch bore. It is sold individually, and sourced directly from the original manufacturer. The sleeve is part of the clamp assembly and is used to secure accessories to the tool.

Fix Number

FIX16392191

Manufacturer Part Number

661379002

This is a single manufacturer-approved screw used to fasten accessories to the output shaft assembly on a multi-tool. The size of this hex head screw is M-6 x 14mm. A hex wrench (sold separately) can be used to remove and install the screw with ease.

Fix Number

FIX10053748

Manufacturer Part Number

V490001230

This is a clip for a variety of lawn and garden equipment. The clip is made of a durable metal, and is 6.5mm in diameter. This part is most commonly used to clamp tubes and hoses in place. The clip is sold individually.

★★★★★

★★★★★

1 Review

Fix Number

FIX10260014

Manufacturer Part Number

2610016801

This is an authentic OEM blade screw for a saw, sold individually. This screw secures the blade in place and is often replaced when the blade starts to wobble. For this repair you will need a hex key/Allen wrench.

Fix Number

FIX9148697

Manufacturer Part Number

90050000005

This nut is used for a variety of handheld gardening tools. The nut has multiple applications depending on the tool you are using. Refer to the diagram provided by the manufacturer for installation instructions and nut location in a specific tool. This lock nut is used to resist loosening when threaded onto a bolt. *Please note: this part is sold individually. The measurements are: 5mm.

Fix Number

FIX10260006

Manufacturer Part Number

2610014582

This part includes one manufacturer-approved collet nut for a multi-tool. The collet nut is what holds the bit in place. If your multi-tool will not hold a bit, this is one of the first components to inspect. It has a hexagonal shape so it can be fastened and unfastened with a wrench. To remove, press the shaft lock button and loosen the collet nut using the collet wrench.

Fix Number

FIX10260248

Manufacturer Part Number

2610945427

This is a genuine OEM sourced replacement part designed for use with Dremel oscillating tools. This steel washer helps to distribute the pressure evenly and allowing parts to be secured safely. It is helps to secure the blade to the tool. This part is made out of metal and it is sold individually.

Fix Number

FIX9238696

Manufacturer Part Number

V490000500

This clip fits lawn and gardening tools. The clip secures the fuel filter to the fuel line on the unit. *Please note: the clip is sold separately. Refer to the manual provided by the manufacturer for further installation instructions.

Fix Number

FIX12505401

Manufacturer Part Number

90583887

This is an original porter cable replacement part manufactured for use with oscillating multi-tools. This special screw is commonly used to fasten the outer flange to the gear case assembly. The screw is available as an individual replacement part, please see model diagram for associative parts.

Fix Number

FIX9943617

Manufacturer Part Number

330019-04

This is a plastite screw for a variety of power tools. It is almost an inch long with a pan head. A plastite screw is needed when using harder plastics. It is more resistant to stripping and pulling out.