Multi-Tool Brushes

Fix Number

FIX9937696

Manufacturer Part Number

30711129009

This is a carbon brush, sold individually. It is advisable to replace both carbon brushes at the same time, meaning you will need to order two, even if only one is worn. If the motor of your tool is running less than perfect, it is likely a case of worn brushes that require replacement. When doing this repair, this is an opportune time to also do a quick check of the condition of the armature.

Fix Number

FIX19505293

Manufacturer Part Number

1619P02870

Fix Number

FIX17076609

Manufacturer Part Number

30711157000

Carbon brushes help deliver electrical current to the motor in select power tools, allowing the motor to run smoothly and consistently. As the brushes wear down, you may notice weak power, intermittent operation, or the tool stopping unexpectedly—especially on models that include an auto-stop feature to protect the motor. A replacement brush set restores proper electrical contact and is typically installed as a pair to keep the motor balanced and performing at its best.

★★★★★

★★★★★

2 Reviews

Fix Number

FIX17016905

Manufacturer Part Number

1605A000BF

This manufacturer-sourced replacement kit is designed for use with Dremel power tools and includes two (2) carbon brushes and two (2) brush holders, each equipped with metal springs and lead wires. Carbon brushes are essential components that conduct electrical current between stationary wires and the rotating motor. As wear items, they gradually degrade through use and friction, and will eventually require replacement to maintain tool performance. To complete this repair, you’ll need a hex key or Allen wrench. Begin by removing the screws that hold the tool’s housing together. Carefully separate the two halves of the housing to access the armature and brush holders. Remove the brush covers and take out the old brushes along with their springs. Install the new brush assemblies, reassemble the housing, and test your tool to ensure proper operation.

Fix Number

FIX10162902

Manufacturer Part Number

30711146001

This is a genuine Fein replacement part manufactured for use with supercut oscillating tools. Brushes are the most frequently replaced part of power tools, because they are a wear items that make constant contact with the spinning armature. This carbon brush is sold individually.

Fix Number

FIX11929577

Manufacturer Part Number

N174174

This is a genuine part that is supplied by the original manufacturer for use with Dewalt oscillating multi-tool. The carbon brush conducts an electrical current to the armature and motor. Carbon brushes are a common wear item, and it is recommended to be replaced often. This part is sold individually, though two are required and it is suggested to replace both brushes at the same time. For this repair you will need a screwdriver and a pair of needle nose pliers to aid you.

Fix Number

FIX18693577

Manufacturer Part Number

291189002

This is a genuine Ridgid replacement part that is OEM sourced to ensure a high-quality standard. The carbon brush is considered a wear item because it presses against the armature while it is rotating to transfer electricity to the armature. Worn brushes can cause issues with the motor like smoking or sparking. This brush is sold as an individual replacement part, please note two brushes are required.

Fix Number

FIX10260224

Manufacturer Part Number

2610921562

This is a Genuine Manufacturer Sourced replacement part used on certain Dremel Variable Speed Rotary Tool. This item includes Two (2) Carbon Brushes with Lead Wires Attached. Carbon brushes are one of the most commonly replaced power tool parts. This is because carbon brushes are wear items, meaning that through friction and use they will gradually wear away until they need replacing. Worn brushes are a common causes of intermittent motor function, reduced electric braking and reduced motor power. A worn-out brush will often be worn down near to the wire lead and can be cracked, pitted, or burned. When replacing carbon brushes, be sure to inspect your armature for burns, cracks, or other damage which can indicate larger motor problems.

Fix Number

FIX10259901

Manufacturer Part Number

2610000579

It is a genuine manufacturer-supplied component which is designed for Dremel oscillating tools. Motor brushes are responsible for transferring electricity to the motor's spinning armature. Because they remain in continual contact with the armature, motor brushes will eventually erode. To ensure the correct repair procedure, refer to the appropriate diagrams for your model. A screwdriver will be needed to perform this repair. Note, this high-quality set includes two brush holders with springs and carbon brushes.

Fix Number

FIX10260225

Manufacturer Part Number

2610921563

This pair of brush doors is specially designed for Dremel rotary tools. It is an authentic high quality item that is sourced directly from original equipment manufacturer. The purpose of the these items is to secure the brush in the tool. This item includes (2) plastic brush doors with (2) metal springs per order. You may need a screwdriver to complete this repair.