Miter Saw Switches

Fix Number

FIX10149734

Manufacturer Part Number

411478-6

This is a single authentic switch activator button. Miter saws have a lockout mechanism on the switch, which stops the tool from being turned on by accident. The lockout is released by pushing on the switch button. The switch button can sometimes break or get lost and will need to be replaced. This is a very easy repair that does not require any tools. The switch button is secured with a plastic locking tab and can be removed by pulling it from the housing. To install the new switch activator button, position it in the housing and press it down until you hear a click.

★★★★★

★★★★★

1 Review

Fix Number

FIX10181008

Manufacturer Part Number

606056-00

This is a trigger switch, which controls the on and off and variable speed functions of the power tool. This trigger has four terminals, which will damage and wear with use. If your equipment is not starting when using the switch or if the variable speed or electric braking are not functioning, these are all common symptoms of a malfunctioning trigger switch. This part is genuinely sourced direct from the manufacturer and is sold individually.

★★★★★

★★★★★

1 Review

Fix Number

FIX10178151

Manufacturer Part Number

5140112-17

This is a genuine OEM replacement part. Sold individually. This kit was made to replace the old switch on the Miter Saws that was discontinued. It includes both handle halves, handle to carry saw, new switch, screws and wire terminals. It also includes an installation sheet. Flat head screwdriver is needed for repair. This switch is a common replacement part and is compatible with the Miter Saw models listed below.

Fix Number

FIX19513476

Manufacturer Part Number

2610950336

Fix Number

FIX10153681

Manufacturer Part Number

651923-1

Genuine OEM Replacement Part used on some Makita Saws. This part is Sold Individually. A switch handles the on/off and variable speed functions. They also have a role in electric breaking; they can momentarily reverse electrical polarity. Because switches use mechanical internals, they will degrade and wear out over time, eventually requiring replacement.

Fix Number

FIX10171462

Manufacturer Part Number

391926-01

This Trigger switch has 2 terminals. This genuine DeWalt replacement part is sold individually. Switches are commonly replaced parts in tools. A switch handles on/off and variable speed operations. They also have a role in electric breaking; they can momentarily reverse electrical polarity. Because switches use mechanical internals, they will degrade and wear out over time, eventually needing replacement. Some common signs of a broken or failing switch are as follows: The tool has completely stopped functioning – it will not start. The tool operates intermittently, requiring multiple tries to turn on, until eventually it won’t start at all. The variable speed function and electric braking aren’t working properly.

Fix Number

FIX16687775

Manufacturer Part Number

N548978

Fix Number

FIX17071244

Manufacturer Part Number

23-66-0036

Fix Number

FIX16391189

Manufacturer Part Number

651083-9

Fix Number

FIX10123642

Manufacturer Part Number

23-66-1425

This is an authentic Milwaukee replacement part, sourced from the original manufacturer for use with abrasive cut-off machines. Switches can wear out over time and a common symptom of a worn switch is trouble starting then running fine once the saw gets going. This switch is available as an individual replacement part, please see model diagram for associative parts.