Miter Saw Bearings

★★★★★

★★★★★

1 Review

Fix Number

FIX10188573

Manufacturer Part Number

N127530

This Ball Bearing is sealed on both sides. It is a genuine replacement part and is sold individually. Ball bearings are used to reduce friction between rotating parts. The balls or rollers take the load and spin, distributing the weight evenly while the minimal contact area of the ball reduces friction. This reduces wear on the tool and allows it to run smoothly. Bearings experience constant wear when the tool is in operation from pressure, heat, vibration and friction. Because of this, many Bearings need periodic maintenance or replacement.

Fix Number

FIX19512517

Manufacturer Part Number

2610911928

This is a ball bearing, sold individually, and designed for table saws and miter saws. This ball bearing has shielding on both sides and is sold as an individual part. Ball bearings minimize friction produced by moving parts. This lessens the wear on the saw and allows it to run efficiently. Bearings are a common wear part due to the constant pressure, heat and vibration, so it is advised to inspect and replace them regularly. This part, like all the parts we sell, is sourced directly from the original manufacturer.

Fix Number

FIX10188435

Manufacturer Part Number

N110359

This authentic ball bearing is sold individually. It can be used in a variety of differently model types, such as miter saws, circular saws, table saws, and angle grinders. This ball bearing is sealed on both sides. Its job is to minimize friction between rotating parts. The armature rotates at a very fast rate, so after years of use, it is normal for the bearings to wear.

Fix Number

FIX10183438

Manufacturer Part Number

644999-00

This part includes one bushing for a miter saw. This bushing is sourced right from the original manufacturer and helps to fasten the blade to the shaft/spindle. If the blade of your miter saw is wobbling, this is one of the components that should be inspected for damage. To access this small metal bushing you will need to remove the blade bolt with a wrench.

Fix Number

FIX19502030

Manufacturer Part Number

1609B02987

Fix Number

FIX10169630

Manufacturer Part Number

330003-60

This is a bearing, and it is used in various power tools. It is meant to reduce tension between the moving parts within the tool. This bearing has a 1 inch outer diameter, less than 1/4-inch inner diameter, and green walls.

★★★★★

★★★★★

1 Review

Fix Number

FIX10169632

Manufacturer Part Number

330003-64

This is a ball bearing for your power tools. It is used in a variety of machines for rotary motion. The bearings support your tools by lowering the friction, which allows easy rotation of moving parts. Depending on how often you use your tool the bearings are a commonly replaced part. This is because they will experience most of the pressure, heat, and vibrations.

Fix Number

FIX10169633

Manufacturer Part Number

330003-66

This genuine manufacturer approved bearing is used to secure spindle and gear that drive the saw blade. It is designed to minimize the friction, over time bearing will begin to fail compromising units functionality. At this point replacing ball bearing should restore unit back to functional condition. This is a sealed metal bearing that is sold individually.

Fix Number

FIX19501750

Manufacturer Part Number

1609B00599

Fix Number

FIX10116895

Manufacturer Part Number

02-04-1229

This authentic replacement part is designed for use with Milwaukee drills/drivers. Ball bearings are used to reduce friction between rotating parts. The balls or rollers take the load and spin, distributing the weight evenly while the minimal contact area of the ball reduces friction. Bearings experience constant wear from pressure, heat, vibration and friction. Because of this, many bearings need to be periodically replaced. This part is made out of metal and it is sold individually.