Drain Cleaner Parts

Shop By Brand

Popular Drain Cleaner Parts

$3.08
  Special Order
Carbon Brush (Sold Individually)
Fix Number FIX10122113
Manufacturer Part Number 22-16-0275
This is a carbon brush, it is also known as a motor brush, and it is used with various power tools and equipment. The brush transfers electric currents to the motor. Your motor brush is an extremely common replacement part. It is considered a wear part, because the constant friction will wear it down. If you are experiencing a poor running motor, you will need to replace this part. New brushes will restore your motors electric braking. We recommend also inspecting your armature for damaging cracks or burns, this can indicate a larger problem in your motor that will require attention.
$3.08
  In Stock
Cord Protector
Fix Number FIX10131782
Manufacturer Part Number 44-76-0210
This cord protector is created to slide onto your cord and fit tightly at the end to protect the base of the cord from getting damaged. If the wires are exposed it can a be a safety hazard, so make sure to replace your cord protector if damaged. Refer to the manual provided by the manufacturer for further installation instructions.
$19.24
  In Stock
Cord Set 18-3 6ft W/ Cord Protector
★★★★★
★★★★★
(1)
Fix Number FIX10122719
Manufacturer Part Number 22-64-0665
$40.15
  In Stock
Air Switch
Fix Number FIX11867412
Manufacturer Part Number 32992
$17.92
  In Stock
Cord 18-3 10'
Fix Number FIX10122789
Manufacturer Part Number 22-64-1832
$53.94
  In Stock
Foot Switch Assembly
Fix Number FIX11867519
Manufacturer Part Number 37967
$4.90
  In Stock
Ball Bearing
Fix Number FIX10116847
Manufacturer Part Number 02-04-0847
$15.71
  In Stock
Bearing
Fix Number FIX10097309
Manufacturer Part Number 44760
$5.25
  In Stock
Ball Bearing
Fix Number FIX10116826
Manufacturer Part Number 02-04-0640
$6.75
  On Order
Brush (2 Required)
Fix Number FIX10116574
Manufacturer Part Number N119739
This part includes one carbon brush with a wire lead and brush spring attached. If the motor of your tool is running poorly, a common cause of this is a worn carbon brush. Carbon brushes should be inspected regularly because they are prone to wear due to friction. If you notice burning or smoke during the use of the tool, it is important to check not only the brushes, but the armature as well.

Brands

Popular Drain Cleaner Models