Beveler Parts

Carbon Brush With Brush Holder

$32.12

Fix Number: FIX17749505
Manufacturer Part Number: 316067170

Service Kerf Plate, 2 Pk.

$7.12

Fix Number: FIX17082175
Manufacturer Part Number: 44-66-0142

This service keft plate is an authentic Milwaukee item designed for use with compound miter saws. It is sourced directly from original equipment manufacturer. The purpose of these plates is to reduce splits of the wood and prevent pieces of it getting jammed between the blade. Please note, this item includes (2) hard plastic kerf plates per order. The hardware to secure these parts is not included, it is sold separately.

Cable Sleeve 12

$6.51

Fix Number: FIX12043750
Manufacturer Part Number: 344101220

Keep in mind this part is made of plastic and rubber and is priced individually. The cable sleeve goes on the cable. It will need to be replaced if it breaks. A set of pliers may be necessary during the installation of this part. It is a genuine OEM sourced part which is specially designed for use with Metabo angle grinders.

Side Support Handle Compl.

$11.98

Fix Number: FIX10416483
Manufacturer Part Number: 316046590

Carbon Brush with Brusholder

$39.63

Fix Number: FIX17017002
Manufacturer Part Number: 316066670

Carbon Brush with Brusholder

Carbon Brush Set, Cut-Off

$16.35

Fix Number: FIX17016974
Manufacturer Part Number: 316065460

This authentic OEM carbon brush set is designed for use in the motor assembly of angle grinders. It includes two brushes, each equipped with lead wires, and is responsible for transferring electrical current to the armature, enabling the motor to function. Over time, carbon brushes naturally wear down due to friction, aging, and frequent use. A worn brush may fail to maintain contact with the armature, leading to reduced power output or complete motor failure. If other motor-related issues have been ruled out, replacing the brushes may restore performance. To perform the repair, first unplug the angle grinder from the power source. Locate and remove the brush holders on the side of the motor housing, then replace the faulty brushes with the new ones. Reinstall the brush holders and ensure proper contact between the brushes and the armature.

Switch Slide

$6.51

Fix Number: FIX12043744
Manufacturer Part Number: 343437100

This is an original component from the Metabo manufacturer. The plastic slide switch is made for use with several angle grinder devices. Fastened to the switch rod in the housing, this item allows the operator to (de)activate the tool. To complete this repair, you will need a hex key and a screwdriver. The slide switch is sold individually.

Armature Compl.

$95.75

Fix Number: FIX12043446
Manufacturer Part Number: 310011020

This armature assembly delivers consistent power transfer to support smooth motor operation. Reliable performance reduces wear and improves efficiency. Replacing a worn armature restores dependable power and operational stability.

Watch the install video

Brush and Holder Assembly With Cut-Off

$16.35

Fix Number: FIX17016232
Manufacturer Part Number: 316046890

This is a genuine Metabo replacement carbon brush, designed to keep your power tools running smoothly. Each brush includes the holder and spring, and while they are sold individually, two are required for most tools. Carbon brushes are wear-and-tear items that naturally degrade over time due to friction. Replacing them can resolve issues like poor motor performance, intermittent operation, or reduced electric braking. Even if only one brush appears worn, it's best to replace both at the same time for optimal performance. Signs of wear include brushes that are worn down near the wire lead, or those that are cracked, pitted, or burned. When replacing brushes, it’s also a good idea to inspect the armature for any signs of damage, such as burns or cracks, which could indicate more serious motor problems.

Carbon Brush Set Cut-off

$16.35

Fix Number: FIX10416486
Manufacturer Part Number: 316046900

This is a genuine Metabo replacement part, it is sold as a set (2). Worn brushes frequently are the cause behind a motor running poorly. • Replacing brushes can fix a motor that's operating intermittently. • New brushes can restore a motor's electric braking. Carbon brushes are one of the most commonly replaced power tool parts. This is because carbon brushes are wear items, meaning that through friction and use they will gradually wear away until they need replacing. Worn brushes are a common causes of intermittent motor function, reduced electric braking and reduced motor power. A worn-out brush will often be worn down near to the wire lead and can be cracked, pitted, or burned. When replacing carbon brushes, be sure to inspect your armature for burns, cracks, or other damage which can indicate larger motor problems.

Popular Beveler Parts

Related Beveler Parts

Popular Beveler Models

Beveler Parts

Start With Your Model Number

Popular Beveler Parts

Related Beveler Parts

Popular Beveler Models