Black and Decker Jig Saw Brushes

Fix Number

FIX12410247

Manufacturer Part Number

445861-25

(Sold Individually) This motor brush is for grinders. The motor brush transfers electric current to the spinning armature in the motor. Unplug the grinder before installing this part. Wear work gloves to protect your hands.

★★★★★

★★★★★

1 Review

Fix Number

FIX10173420

Manufacturer Part Number

445860-00

This is a brush spring and it is used in a variety of power tools. The spring applies force to the motor brush inside the motor. This will keep the brush tight along the armature. If the brush has worn down it will create heat, and the spring will lose tension. If this happens, both parts will have to be replaced.

Fix Number

FIX18979418

Manufacturer Part Number

089754-01

Genuine Black and Decker replacement part This brush is sold individually, 2 are needed for the tools shown below It is always best to replace both brushes, even if only one is worn. Worn brushes frequently are the cause behind a motor running poorly. Replacing brushes can fix a motor that's operating intermittently. New brushes can restore a motor's electric braking. Carbon brushes are one of the most commonly replaced power tool parts. This is because carbon brushes are wear items, meaning that through friction and use they will gradually wear away until they need replacing. Worn brushes are a common causes of intermittent motor function, reduced electric braking and reduced motor power. A worn-out brush will often be worn down near to the wire lead and can be cracked, pitted, or burned. When replacing carbon brushes, be sure to inspect your armature for burns, cracks, or other damage which can indicate larger motor problem

Fix Number

FIX12453768

Manufacturer Part Number

449899-05

Included in part number 143843-00

Fix Number

FIX10180117

Manufacturer Part Number

582761-01

It is a genuine OEM brush ring assembly that is specially designed for DeWALT, Black and Decker and Porter Cable jig saws. As the armature rotates inside the motor housing, electrical current is transferred through carbon brushes. Excessively worn brushes can result in visible arcing, decreased performance, power fluctuations or a total loss of power to the motor. To ensure the proper replacement procedure, refer to the owner's manual and the parts diagrams for your model. Note, one durable carbon brush with an attached lead wire and a spring is included. A screwdriver will be needed to take apart and reassemble the housing when performing this repair. It is advised to replace both brushes at the same time to ensure an even wear.

Fix Number

FIX18979417

Manufacturer Part Number

085943-02

It is a high-quality replacement part that is supplied by original equipment manufacturer for use with Black and Decker and Porter Cable power equipment. The purpose of the brush spring is to provide tension that will help to push the carbon brush against the armature. Over time the spring may lose its tension eventually requiring replacement for the tool to function as intended. It is made from high-quality metal and it is sold individually.

Fix Number

FIX18981303

Manufacturer Part Number

380419-00

Fix Number

FIX10165890

Manufacturer Part Number

140994-00

This is a genuine DeWALT and Black & Decker replacement part used in compatible drills, sanders, and saws. The brush is made out of metal. When replacing this item a screwdriver, a set of pliers, and an allen wrench might be required during the installation process. It may become lost or broken and will need to be replaced. This part is available as an individual replacement.

Fix Number

FIX18988153

Manufacturer Part Number

90525450

Fix Number

FIX10180104

Manufacturer Part Number

582696-00

This is a genuine replacement part sourced directly from the manufacturer. The brush box is commonly found in Black & Decker jigsaws. This part is made of high-quality plastic, and is used to hold the carbon brush and spring. This item is sold individually.