Hammer Bearings

Popular Hammer Bearings

Miter Saw Ball Bearing
$18.72
In Stock
★★★★★
★★★★★
1 Review
Fix Number
FIX10188573
Manufacturer Part Number
N127530
This Ball Bearing is sealed on both sides. It is a genuine replacement part and is sold individually. Ball bearings are used to reduce friction between rotating parts. The balls or rollers take the load and spin, distributing the weight evenly while the minimal contact area of the ball reduces friction. This reduces wear on the tool and allows it to run smoothly. Bearings experience constant wear when the tool is in operation from pressure, heat, vibration and friction. Because of this, many Bearings need periodic maintenance or replacement.
Fixes these symptoms
Bearing
$6.51
In Stock
Fix Number
FIX10188435
Manufacturer Part Number
N110359
This authentic ball bearing is sold individually. It can be used in a variety of differently model types, such as miter saws, circular saws, table saws, and angle grinders. This ball bearing is sealed on both sides. Its job is to minimize friction between rotating parts. The armature rotates at a very fast rate, so after years of use, it is normal for the bearings to wear.
Ball Bearing
$20.28
In Stock
★★★★★
★★★★★
1 Review
Fix Number
FIX10169632
Manufacturer Part Number
330003-64
This is a ball bearing for your power tools. It is used in a variety of machines for rotary motion. The bearings support your tools by lowering the friction, which allows easy rotation of moving parts. Depending on how often you use your tool the bearings are a commonly replaced part. This is because they will experience most of the pressure, heat, and vibrations.
Ball Bearing
$9.63
In Stock
Fix Number
FIX10141475
Manufacturer Part Number
210023-2
This Ball Bearing is sealed on both sides. This is a genuine Makita replacement part that is sold individually. • Ball bearings are used to reduce friction between rotating parts. The balls or rollers take the load and spin, distributing the weight evenly while the minimal contact area of the ball reduces friction. This reduces wear on the tool and allows it to run smoothly. • Bearings experience constant wear when the tool is in operation from pressure, heat, vibration and friction. Because of this, many Bearings need periodic maintenance or replacement.
Fix Number
FIX10141492
Manufacturer Part Number
210059-1
This authentic replacement part which is specially designed for use with Makita power tools. Ball bearings are used to reduce friction between rotating parts, over time components may begin to wear out and fail eventually requiring a replacement. Please note this high-quality ball bearing is made of durable metal and it is sold individually.
Ball Bearing
$26.20
In Stock
Fix Number
FIX10141520
Manufacturer Part Number
211031-6
Included in Part Number 516306-1. rnThis Ball Bearing is sealed on both sides. This genuine Makita replacement part is sold individually. rnrn • Ball bearings minimize friction between rotating parts in your tool. The balls or rollers bear the load and spin, distributing the weight evenly, while the minimal contact area of the balls reduces friction. This reduces wear on the tool, allowing it to run smoothly. rn • Bearings experience constant wear when the tool is in operation from pressure, heat, vibration and friction. Because of this, many Bearings need periodic maintenance or replacement.
Ball Bearing 6201ddw, Ga4030
$31.31
In Stock
Fix Number
FIX10141558
Manufacturer Part Number
211129-9
This is an authentic Makita replacement part manufactured for use with angle grinders and circular saws. The sealed bearing is used to reduce friction between a rotating shaft and fixed housing or assembly. This bearing is often used to allow the spindle to rotate inside the gear box, but may have other uses. Please see model diagram for part location and usage. This bearing is sold individually.
Ball Bearing
$7.76
In Stock
Fix Number
FIX10116847
Manufacturer Part Number
02-04-0847
Included in part number 14-13-0465
Ball Bearing
$29.10
In Stock
Fix Number
FIX10141546
Manufacturer Part Number
211097-6
Fix Number
FIX10141514
Manufacturer Part Number
211021-9
This replacement ball bearing is an authentic Makita item. It is supplied directly from original equipment manufacturer for use with angle grinders. Please check diagrams for proper application of this item. The bearing is specially designed to reduce friction between rotating parts. Over time it will wear out and will need to be replaced. This is a sealed metal bearing and it is sold individually. Included in part number 515616-3

Hammer Bearing Brands