Hammer Drill Switches

★★★★★

★★★★★

1 Review

Fix Number

FIX10123482

Manufacturer Part Number

23-66-0177

This is an OEM trigger switch with four internal terminals. The switch controls the on/off and varying speed functions. It is common for the switch of a power tool to wear and malfunction over the use of a tool and require replacement. A few signs that will indicate a replacement is need is If the tool will not turn on when you engage the switch, it requires multiple tries to turn on, or the variable speeds are not working.

Fix Number

FIX19501041

Manufacturer Part Number

160720030T

Fix Number

FIX19504872

Manufacturer Part Number

1617200048

★★★★★

★★★★★

1 Review

Fix Number

FIX10259985

Manufacturer Part Number

2610013852

Genuine manufacturer sourced replacement switch used on Dremel rotary tool. It is an important part of the tool which handles on/off operations. Because switches have mechanical parts, they will tend to wear out over time, eventually requiring replacement. Switch has a plastic body and it is sold individually. To replace this switch you would need a Screwdriver. • Remove screws used to hold two pieces of housing set together • Disconnect wires from the old switch and remove it from the housing • Place the new switch in the housing and connect wires to it • Reassemble the housing

Fix Number

FIX19503748

Manufacturer Part Number

1611329024

Fix Number

FIX10153680

Manufacturer Part Number

651922-3

This replacement switch is specially made for use on Makita power tools. Switches are a commonly replaced item in power tools. They play a key role by controlling on/off function of a tool. Because switches use mechanical internals, they will degrade and wear out over time, eventually requiring replacement. To replace this switch you would need a screwdriver. • First make sure the tools is not plugged in • Remove housing screws • Disconnect wires from the old switch • Remove it from the housing • Place the new switch in the housing • Reconnect wires to it • Reassemble and test the unit

Fix Number

FIX17071349

Manufacturer Part Number

23-66-5027

Fix Number

FIX19504884

Manufacturer Part Number

1617200120

Fix Number

FIX11929785

Manufacturer Part Number

N421307

This is a VSR (Variable Speed Reverse) switch used in various power tool models, including hammer drills and power screwdrivers. The VSR switch serves to power the tool on and off, as well as control the motor speed and direction. Over time, the VSR switch may malfunction, resulting in your tool not turning on or changing speeds as intended. If you observe difficulties with your power tool, it is likely that the switch needs replacement. Please note that this switch is sold individually and does not include any additional hardware, such as screws or wires. Replacing the switch is a straightforward process that only requires a screwdriver or drill. Start by disconnecting your tool from its power source, whether it is a power cord or battery, and then remove the screws on the side of your tool to access the inner housing. Disconnect the wires attached to the old switch, followed by removing the switch itself. Install the new switch and connect its motor wires first, and then the power supply wires. Once all the wires are securely attached, reassemble the housing and fasten it with the necessary hardware.

Fix Number

FIX11885064

Manufacturer Part Number

650747-2

This is a Genuine Manufacturer Sourced replacement part used on certain Makita Drills. This is a Plastic Switch with Wire Leads. Switch handles on/off function of the tool. They also have a role in electric breaking, they can momentarily reverse electrical polarity. Because switches use mechanical internals, they will degrade and wear out over time, eventually needing replacement.