Grinder Bearings

Fix Number

FIX10188863

Manufacturer Part Number

N175104

This authentic replacement part is designed for use with DeWALT angle grinders. Bearings are used to reduce friction between rotating parts. The balls or rollers take the load and spin, distributing the weight evenly while the minimal contact area of the ball reduces friction. Bearings experience constant wear from pressure, heat, vibration, and friction eventually requiring replacements. This high-quality component is made of durable metal and is sold individually. A wrench set will be needed to perform this repair. Make sure to refer to the appropriate diagrams for your model to ensure the proper replacement procedure.

Fix Number

FIX10188435

Manufacturer Part Number

N110359

This authentic ball bearing is sold individually. It can be used in a variety of differently model types, such as miter saws, circular saws, table saws, and angle grinders. This ball bearing is sealed on both sides. Its job is to minimize friction between rotating parts. The armature rotates at a very fast rate, so after years of use, it is normal for the bearings to wear.

Fix Number

FIX10188594

Manufacturer Part Number

N130916

This is an authentic OEM replacement part for certain models of DeWalt Grinders that has been sourced directly from DeWalt. To ensure that this will fit your grinder, please see the "Model Cross Reference List" below. The Ball Bearing fits between the bearing cup and the slinger, and its primary purpose is to reduce friction to allow the device to operate smoothly. Ball Bearings experience constant wear from the pressure, heat, vibration, and friction of the grinder, and may need to be replaced periodically as a result. Signs of broken or failing Ball Bearings include squealing, screeching, or grinding noise when powering the device off. This part has a diameter of approximately 3/4", made of metal, and is sold individually.

Fix Number

FIX10169630

Manufacturer Part Number

330003-60

This is a bearing, and it is used in various power tools. It is meant to reduce tension between the moving parts within the tool. This bearing has a 1 inch outer diameter, less than 1/4-inch inner diameter, and green walls.

★★★★★

★★★★★

1 Review

Fix Number

FIX10169632

Manufacturer Part Number

330003-64

This is a ball bearing for your power tools. It is used in a variety of machines for rotary motion. The bearings support your tools by lowering the friction, which allows easy rotation of moving parts. Depending on how often you use your tool the bearings are a commonly replaced part. This is because they will experience most of the pressure, heat, and vibrations.

Fix Number

FIX19503565

Manufacturer Part Number

1610905025

Fix Number

FIX10180911

Manufacturer Part Number

605040-27

This part includes one OEM ball bearing. This ball bearing is sealed on both sides. They are designed to minimize friction between moving parts and evenly distribute weight. Bearings are a general wear part that require regular maintenance to keep your equipment running smoothly and efficiently.

Fix Number

FIX10141475

Manufacturer Part Number

210023-2

This Ball Bearing is sealed on both sides. This is a genuine Makita replacement part that is sold individually. • Ball bearings are used to reduce friction between rotating parts. The balls or rollers take the load and spin, distributing the weight evenly while the minimal contact area of the ball reduces friction. This reduces wear on the tool and allows it to run smoothly. • Bearings experience constant wear when the tool is in operation from pressure, heat, vibration and friction. Because of this, many Bearings need periodic maintenance or replacement.

Fix Number

FIX10141520

Manufacturer Part Number

211031-6

Included in Part Number 516306-1. rnThis Ball Bearing is sealed on both sides. This genuine Makita replacement part is sold individually. rnrn • Ball bearings minimize friction between rotating parts in your tool. The balls or rollers bear the load and spin, distributing the weight evenly, while the minimal contact area of the balls reduces friction. This reduces wear on the tool, allowing it to run smoothly. rn • Bearings experience constant wear when the tool is in operation from pressure, heat, vibration and friction. Because of this, many Bearings need periodic maintenance or replacement.

Fix Number

FIX10141492

Manufacturer Part Number

210059-1

This authentic replacement part which is specially designed for use with Makita power tools. Ball bearings are used to reduce friction between rotating parts, over time components may begin to wear out and fail eventually requiring a replacement. Please note this high-quality ball bearing is made of durable metal and it is sold individually.