Generator Brushes

Fix Number

FIX11871060

Manufacturer Part Number

0050439SRV

This is a genuine Powermate replacement part, it is sold individually. • Worn brushes frequently are the cause behind a motor running poorly. • Replacing brushes can fix a motor that's operating intermittently. • New brushes can restore a motor's electric braking. Carbon brushes are one of the most commonly replaced power tool parts. This is because carbon brushes are wear items, meaning that through friction and use they will gradually wear away until they need replacing. Worn brushes are a common causes of intermittent motor function, reduced electric braking and reduced motor power. A worn-out brush will often be worn down near to the wire lead and can be cracked, pitted, or burned. When replacing carbon brushes, be sure to inspect your armature for burns, cracks, or other damage which can indicate larger motor problems.

Fix Number

FIX11923497

Manufacturer Part Number

0J8415

Fix Number

FIX12132354

Manufacturer Part Number

31295-Z22-000

Fix Number

FIX9938101

Manufacturer Part Number

308445002

This is a genuine OEM sourced replacement part that has been sourced from the original manufacturer to be used with portable generators from Homelite and Husky. The carbon brush is used to relay electricity from the generator head. This item is sold as an individual replacement part.

★★★★★

★★★★★

1 Review

Fix Number

FIX11872555

Manufacturer Part Number

0069327SRV

This authentic OEM approved replacement brush assembly is designed for use with generator motors. This assembly stable and safe contact between brushes and armature. This assembly includes a plastic holder, two (2) carbon brushes with lead wires and springs attached. To replace this assembly you would need a set of wrenches. • First remove screws holding the cover together • Carefully separate housing to gain access to armature and brush holder • Disconnect wires from old brushes • Remove old brushes and install the new assembly • Reassemble and test the motor

Fix Number

FIX9875010

Manufacturer Part Number

0J6075

Fix Number

FIX9935484

Manufacturer Part Number

290441007

This is an OEM part sourced directly from the manufacturer. The brush assembly is found in generators from Homelite and Ryobi. This part is made of high-quality plastic and metal, and includes two carbon brushes that transfer electricity to the armature assembly. You may require an Allen key or wrench when replacing this item. This product is provided as an individual replacement part.

Fix Number

FIX11872551

Manufacturer Part Number

0069320SRV

This is an authentic Powermate replacement part that has been sourced from the original manufacturer to be used with belt sanders. A carbon brush carries electricity to the armature by pressing against the commutator bars. Common symptoms of a faulty brush module include intermittent power loss, decreased performance, or a total loss of power to the motor. This brush module consists of two carbon brushes, the plastic holder, and the springs. A screwdriver will be needed to perform this repair. Refer to the appropriate diagrams for your model to ensure the correct replacement procedure.

Fix Number

FIX12132355

Manufacturer Part Number

31295-Z30-000

Fix Number

FIX9063496

Manufacturer Part Number

66386GS

This is a brush holder assembly for your generator. Brushes conduct electric currents to provide power in the motor of your unit. The brush assembly is mounted into a bearing carrier, and is wired to connect the rotor to the stator. This assembly includes one plastic brush holder, and two carbon brushes. Lead wires and springs are attached.