Milwaukee Electric Drill Power Cords

Fix Number

FIX10131782

Manufacturer Part Number

44-76-0210

This cord protector is created to slide onto your cord and fit tightly at the end to protect the base of the cord from getting damaged. If the wires are exposed it can a be a safety hazard, so make sure to replace your cord protector if damaged. Refer to the manual provided by the manufacturer for further installation instructions.

Fix Number

FIX10134042

Manufacturer Part Number

48-76-4008

This Milwaukee Quik-Lok® cord is a genuine OEM replacement part, it is sold individually. This is a three wire grounded 8 foot cord for fast field replacement of a damaged cord. Made of premium grade Hi-Flex wire the cord is quickly removed and attached to Milwaukee tools with the Quik-Lok® cord feature. To change a damaged cord simply turn the collar at the top of the cord counter clockwise to loosen the nut and pull down on the cord to remove. To re-attach a new cord, line up the pins in the end of the tool with the pin receptacles in the end of the cord, push together and turn the collar clockwise to lock in place. The Cord has a 5-15P NEMA type plug.

Fix Number

FIX10122674

Manufacturer Part Number

22-64-0215

This is a cord set for your power tools. It is constructed with a tough outer-rubber insulation for a longer life span. The 18-gauge power cord is 8 feet long, and comes with 2 prongs and 2 wires. This cord is black in color and is sold individually.

Fix Number

FIX10122663

Manufacturer Part Number

22-64-0121

This cord is a genuine Milwaukee replacement part and is sold individually. This cord is used on the Milwaukee tool listed below It is a 3 wire cord with 3 prongs and does need to be grounded to the tool.

Fix Number

FIX10131777

Manufacturer Part Number

44-76-0150

This is a Genuine OEM replacement Protector Grommet which is used on Milwaukee Power Tools. This part is made out of Rubber and is Sold Individually. It is important to have a cord protector on your tool to improve friction, seal cable and protect it from a potential damage. Replacing this item would differ based on your tool. • First you would need to gain access to internal connections of Power Cord by removing housing of your tool • Once you have disconnected Power Cord you would need to loop it through the Protector • Re-Connect Power Cord to your tool • Secure Cord Protector in the Housing opening and assemble your tool

Fix Number

FIX10131757

Manufacturer Part Number

44-76-0050

This is a Genuine OEM replacement Protector Grommet which is used on Milwaukee Power Tools. This part is made out of Rubber and is Sold Individually. It is important to have a cord protector on your tool to improve friction, seal cable and protect it from a potential damage. Replacing this item would differ based on your tool. • First you would need to gain access to internal connections of Power Cord by removing housing of your tool • Once you have disconnected Power Cord you would need to loop it through the Protector • Re-Connect Power Cord to your tool • Secure Cord Protector in the Housing opening and assemble your tool

★★★★★

★★★★★

1 Review

Fix Number

FIX10122719

Manufacturer Part Number

22-64-0665

This is an genuine OEM approved replacement part designed for use with Milwaukee Power Tools. This item is Sold Individually. Due to the use or other factors a cord can crack or get damaged otherwise. It is important to replace a damaged cord before continuing to use your equipment. It is made out of Rubber and Metal. This cord comes together with Protector/Grommet.

★★★★★

★★★★★

1 Review

Fix Number

FIX10122696

Manufacturer Part Number

22-64-0395

This is an authentic Milwaukee replacement part. It is a versatile part used in many handheld power tools. This power cord set includes plug, cord, and cord protector. A cord protector guards a cord from damage caused by motion and pulling at the point where it is connected to the tool. One (1) set is included per order.

Fix Number

FIX10131774

Manufacturer Part Number

44-76-0130

This is an authentic and original replacement part. It fits a variety of Milwaukee handheld power tools. This cord protector prevents strain/damage to the cord where it connects to the tool. One (1) rubber cord protector is included in this purchase. Please note that a replacement cord is sold separately. Depending on your power tool model, a screwdriver should be the only tool needed to complete this repair. • Ensure tool is disconnected from power source • Remove the tool casing • Disconnect cord/wires from tool • Pull cord through the cord protector • Reconnect wires • Reassemble and test out tool

★★★★★

★★★★★

1 Review

Fix Number

FIX10122659

Manufacturer Part Number

22-64-0076

This replacement cord is specially produced for Milwaukee power tools. This item is supplied directly from original equipment manufacturer. The purpose of a power cord is to deliver electricity from an outlet to the tool. This cord is rubber insulated and it is sold individually. Please note, the protector/grommet is sold separately. Replacing this cord is simple task that should only require a screwdriver. • Remove the housing screws • Separate housing pieces • Disconnect wires from the old cord • Remove old cord and secure the new one • Reassemble and test the unit