Mortiser Parts

Switch W/ Key

$41.51

Fix Number: FIX10325609
Manufacturer Part Number: 489105-00

This Switch is an OEM approved replacement part for various tools and models manufactured by Delta, Black and Decker, and Porter Cable. For full compatibility, please see the "Model Cross Reference List" below. This Switch has four terminals, a removable safety key, and a compact design for easy installation. The purpose of the switch is to turn the device on/off, as well as playing a role in electric breaking by momentarily reversing electrical polarity. Due to the mechanical internals of switches, they tend to degrade and wear out over time, making them a commonly replaced part in power tools. Common symptoms of a broken switch include: the device has completely stopped functioning, it will not turn on, and turning off intermittently during use. Each Switch is sold individually, and may also be referred to as a Rocker Switch.

Installation Instructions

keith from EMPORIA, KS

Power switch would not turn saw off

unplugged power cord.
removed the nut holding the power switch assembly on the saw.
removed 3 screws from the back cover.
removed the 2 white wires and 2 black wires from the switch terminal post. pay attention to wire color on each post.
removed old switch from the bracket by squeezing the sides of the old switch to remove the switch from the bracket.
inserted the new switch in place in the opening.
re attached the wires to the spade terminal on the switch using the 4 terminals. black on the 2 posts top and bottom on one side and the other side white on the top and bottom.
re attach the switch assembly to the table saw
test operation Read more...

Key

$10.37

Fix Number: FIX10318424
Manufacturer Part Number: 1343758

This safety key fits multiple hardware tools and is inserted into the switch to make it possible for your machine to turn on and operate. Tip: you can remove the key to prevent unauthorized use of the machine. For installation instructions refer to the diagram provided by the manufacturer.

Bushing 3/4

$15.36

Fix Number: FIX10377771
Manufacturer Part Number: 23011034

Carbon Brush

$29.14

Fix Number: FIX10162897
Manufacturer Part Number: 30711131000

Groove Ball Bearing

$11.45

Fix Number: FIX10164473
Manufacturer Part Number: 41701001172

This is a groove ball bearing for your power tools. This part is sold individually. The groove ball bearing reduces friction between the rotating armature, and the motor housing in your power tools. It takes most of the pressure, so depending on how often you use your tool, it is a frequently replaced part.

Carbon Brush

$16.07

Fix Number: FIX10162900
Manufacturer Part Number: 30711136002

This is a carbon brush for your power tools. It powers the tool by conducting a current in the electric motor. It is made of carbon and has an attached lead wire. Depending on usage the carbon brush will wear down. Due to the constant contact with an armature, the part will eventually need to be replaced to keep your tool running efficiently.

Flat Washer, M8

$7.41

Fix Number: FIX10517157
Manufacturer Part Number: TS-1550061

This flat washer is designed to fit a variety of power tools. The washer helps distribute the pressure evenly between parts and has multiple applications depending on your specific tool. Check the diagram for the accurate location in your tool. *Please note: this part is sold individually.