Drill Gears

Fix Number

FIX10138885

Manufacturer Part Number

126459-4

This gear assembly is an authentic OEM component. It is designed for use with Makita driver-drills. The assembly contains gears and it is the part that drives the chuck. Over time components may wear out or get damaged eventually requiring a replacement assembly. It is made of high-quality materials and is sold as an individual item. Check the owners manual and the diagrams of your model for the exact location and the correct installation of this part. You will need a screwdriver to take the drill apart and perform this repair.

Fix Number

FIX10138886

Manufacturer Part Number

126460-9

This part is a genuine manufacturer-sourced part, which is specially designed for Makita drills. The gear assembly is an important component to your cordless drill. It consists of the clutch, transmission, and a hammer drill mechanism. The most common symptom that your gear assembly is going bad is that the motor spins, but the chuck does not. When this happens, you will usually hear grinding noises from the transmission at the same time. However, before replacing the gear assembly make sure the gear selector isn't moved between the high and low gears, if so your drill will display the same symptoms. The following tools are required for the repair: torx driver, Phillip's screwdriver, long-nosed pliers, large screwdriver, hammer, large Allen wrench and small screwdriver. This part is sold individually and is made of metal and hard plastic.

Fix Number

FIX16658790

Manufacturer Part Number

127099-1

This is a genuine Makita replacement part that has been sourced from the original manufacturer and is intended to be used with cordless drills. The gear assembly links with the motor and the cuck. This item is used to regulate the drill\\\'s torque output. The gear assembly is priced as a single item.

Fix Number

FIX10338405

Manufacturer Part Number

53193

Fix Number

FIX10139769

Manufacturer Part Number

153622-6

Fix Number

FIX10173609

Manufacturer Part Number

449489-00SV

This is an original replacement part sourced directly from the manufacturer. The gear and spindle assembly is commonly found in drills from DeWALT and Black & Decker. This part is made of metal, and is placed in the gear case to help transfer power from the armature to the drill chuck. You may require a screwdriver when replacing this item. It is advisable when removing multiple parts to keep careful track of their order so they can be reassembled correctly. This item is sold as an individual replacement part. Includes part number 449490-00

Fix Number

FIX16266561

Manufacturer Part Number

123443-0

Fix Number

FIX10172185

Manufacturer Part Number

400147-00

This gear is an OEM direct from DeWalt. The metal gear is designed for use with many electric drill devices. The gear helps to power the spindle, and is sold individually. You will need a screwdriver for the replacement.

Fix Number

FIX10138872

Manufacturer Part Number

126179-0

It is a genuine item that is supplied directly from the original manufacturer for use with Makita drills. This is an identical replacement for a missing or a faulty gear assembly that was installed on a new unit. The part connects to the motor in order to drive the chuck, please make sure to refer to the appropriate diagrams of your model for the exact location and application of this component. Keep in mind this high-quality assembly is made of durable materials and is sold individually.

Fix Number

FIX10139674

Manufacturer Part Number

153246-8