Makita Electric Drill Parts

Makita Appliance Parts

Popular Makita Electric Drill Parts

Carbon Brush Set CB-303
$10.85
In Stock
Fix Number
FIX10156649
Manufacturer Part Number
CB303
The carbon brush is used on a variety of tools and are commonly replaced because they wear out easily with time and use. If your brush is worn out it can affect the motor from working properly and reduce electric braking. Tip: to check if the brush is worn out, inspect the wire lead for cracks, burns and other damage. Refer to the diagram provided by the manufacturer for further installation instructions. *Please note: This part is sold individually. This assembly includes a carbon brush, spring and holder.
Power Cord
$21.97
In Stock
Fix Number
FIX10153834
Manufacturer Part Number
664064-4
This is a power cord, and it is used with several power tools. It is made of a thick rubber that is tough, and insulated for a long life. It has two 18 gauge wires, and is 8 feet long. When removing your old cord, take note of the wire leads placements, and how they connect to the receptacle in the tool. You will have to attach the new cord similarly.

Installation Instructions

John from Hancock, MI
Did not come with grinding disc guard
While unit was unplugged I screwed clamp of guard around grinder. Read more...
Carbon Brush CB-124 (Set of 2)
$7.83
On Order
★★★★★
★★★★★
1 Review
Fix Number
FIX10156640
Manufacturer Part Number
CB124
Carbon brushes are needed to conduct electricity to the armature through the commutator. The brushes are continuously rubbing against the rotating commutator, so will wear down over time, and will need to be replaced. If you are experiencing excessive sparks, this can also be caused by a damaged armature, so it is best to check it at the same time. This part includes two carbon brushes, which need to be replaced at the same time.
Fix Number
FIX10156656
Manufacturer Part Number
CB407
This set comes with two carbon brushes with wire leads and brush strings attached. If your motor is not running efficiently or is operating intermittently, this is a common sign of worn brushes. Due to the friction they are constantly under, they will wear over time, and will start to appear cracked, pitted, or burnt if not replaced regularly. We recommend also taking a look at the armature to ensure it is not damaged. This brush set is compatible with multiple model types, so it is best to consult your user manual for repair instructions.
Fix Number
FIX10156657
Manufacturer Part Number
CB408
This part includes two carbon brushes with wire leads and brush springs. Worn brushes are typically presented as a failed or underperforming motor. Carbon brushes are a part that commonly wears, so it is a good idea to have these on hand. They are essential for a properly running motor because they conduct electricity to the armature. For this repair, you will start by removing the first brush from the motor, using a screwdriver to remove the brush cap. Once the cap is removed, the brush can be removed. Align the new brush with the holder and then reinstall the cap. Repeat these same steps for the other brush.
Fix Number
FIX10156669
Manufacturer Part Number
CB75
If your motor is running poorly, running intermittently, it is likely in need of new carbon brushes. This part includes a set of two carbon brushes with wire leads and brush springs attached. Changing the carbon brushes is part of your regular maintenance, so it is a good idea to have a few extra on hand. When replacing the carbon brushes, it is also advised to inspect the armature at the same time.
Cord (2X16X8 SJT)
$13.40
In Stock
Fix Number
FIX10153839
Manufacturer Part Number
664213-3
Ball Bearing
$14.83
In Stock
Fix Number
FIX10141520
Manufacturer Part Number
211031-6
Fix Number
FIX10153918
Manufacturer Part Number
682502-4
This is a cord guard, also known as a strain reliever, for your power tools. Power tool cords go through a lot of stress during usage, and this part is designed to remove some of that stress from the weakest point, which is where the cord meets the tool. Depending on how often you use your power tool, your cord guard will deteriorate. When this happens, you should replace it immediately. Keeping a strong power cord guard will help your tool live a longer life.

Installation Instructions

John from Hancock, MI
Did not come with grinding disc guard
While unit was unplugged I screwed clamp of guard around grinder. Read more...
Helical Gear 41N
$7.66
In Stock
Fix Number
FIX10142974
Manufacturer Part Number
227769-3

Makita Electric Drill Appliance Types

Related Makita Electric Drill Parts

Popular Makita Electric Drill Models