OEM Milwaukee Cordless Drill Parts & Accessories

Ball Steel 3.5 Mm

$6.51

Fix Number: FIX10116744
Manufacturer Part Number: 02-02-0170

This is an authentic Milwaukee replacement part that has been sourced from the original manufacturer to be used with impact drivers, wrenches, and screwdrivers. The steel ball is used to reduce friction between the anvil and the impact assembly. The steel ball is priced as a single item.

Watch the install video

Carbon Brush Kit

$18.88

Fix Number: FIX10120878
Manufacturer Part Number: 14-46-2012

This is a manufacturer-approved brush card assembly. The brush card is an easy way to service the brushes on your power tool. The assembly includes the brushes, the brush springs, holders, and the wire leads that go to the motor. This is a simple repair that will require you to release the spring tension on the brush and then secure the brush card in the appropriate position.

Motor Assembly

$24.15

Fix Number: FIX11877279
Manufacturer Part Number: 23-30-0650

This is an authentic replacement part manufactured for use with Milwaukee ratchets. The motor assembly is used to power the ratchet and it the motor includes the gear that drives the planet gears. This motor assembly is available as an individual replacement part.

Chuck

$51.65

Fix Number: FIX17080954
Manufacturer Part Number: 42-66-8003

Brush Card Assembly

$18.88

Fix Number: FIX10122416
Manufacturer Part Number: 22-22-2602

This is a genuine brush card assembly for a drill/driver. The function of this part is to hold the carbon brushes around the armature, providing a secure contact. This assembly includes a plastic holder ring, four metal brush holders with springs and four carbon brushes with lead wires. For this repair you will need a screwdriver and will need to remove the cover to get access the part.

Spring

$6.51

Fix Number: FIX10127941
Manufacturer Part Number: 40-50-1470

This spring is an OEM part direct from the Milwaukee manufacturer. Compatible with many drills, the metal spring is fitted inside the sleeve for resistance. This item is sold individually. A screwdriver and a pair of pliers may be helpful for the installation.

Retaining Ring - Ext

$6.51

Fix Number: FIX10127118
Manufacturer Part Number: 34-60-0725

This external retaining ring, also known as a snap ring or circlip, is supplied by the original manufacturer for use in impact drivers. It helps to secure the collar in the front housing assembly. It should be replaced if it is lost, damaged, or no longer able to remain securely attached. To replace the retaining ring, disassemble the front housing assembly and pull out the ring. Position the new ring in its place and reassemble the housing. Each retaining ring is sold individually.

Service Armature

$40.65

Fix Number: FIX10121350
Manufacturer Part Number: 16-07-2610

An authentic OEM sourced service armature that is designed for Milwaukee drill drivers. The armature is the central component within an electric motor. It is composed of a steel shaft, copper windings, and a series of commutator bars through which carbon brushes transfer electricity. If the tool is overloaded, the copper windings can become extremely hot melting the windings causing armature to fail. Remember to be especially careful of the armature fan when you remove it, because if you break it, you will have to replace the entire armature. It is highly recommended to replace both carbon brushes when replacing an armature. This assembly includes one armature, plastic fan, armature bearings and the pinion gear.

Keyless 1/2

$43.95

Fix Number: FIX17016952
Manufacturer Part Number: 42-66-0023

This part is an OEM from the Milwaukee manufacturer. The keyless chuck is constructed of high-quality metal with a plastic grip. The chuck is fitted onto the gearbox assembly, and is designed to hold the bits and tools necessary for projects. This item is sold individually. It is recommended to refer to the specific manual for further instructions.

Belt Clip Assembly

$8.02

Fix Number: FIX10129406
Manufacturer Part Number: 42-70-2653

This is a genuine Milwaukee replacement part, it is sold individually. The Milwaukee Belt Hook is attached to the bottom of the handle assembly on the tool model numbers shown below. Its purpose is to hook the tool to your belt when not using the tool. The Belt Kit includes the screw to attach it to the housing of the tool.

Milwaukee Cordless Drill Parts

Popular Milwaukee Cordless Drill Parts

Milwaukee Cordless Drill Appliance Types

Popular Milwaukee Cordless Drill Models

Milwaukee Cordless Drill Parts

Start With Your Model Number

Popular Milwaukee Cordless Drill Parts

Milwaukee Cordless Drill Appliance Types

Popular Milwaukee Cordless Drill Models