Compressor Valves

★★★★★

★★★★★

3 Reviews

Fix Number

FIX12508562

Manufacturer Part Number

N286039

This is a single OEM drain valve for an air compressor. A drain valve is a small device that is usually located at the bottom of the compressor air receiver. The drain valve can be opened or closed, and this allows water to exit the tank. Water builds up if air is left in the tank for an extended period of time, and if left for too long, it can start to rust out the inside of the tank and the drain valve can become clogged with rust or start to corrode. You should be draining the tank each time you use your air compressor to stop this from happening. This is a very quick and simple repair. Use a wrench to remove the old drain valve, and thread the new one into place by hand.

★★★★★

★★★★★

6 Reviews

Fix Number

FIX18993125

Manufacturer Part Number

N008792

★★★★★

★★★★★

2 Reviews

Fix Number

FIX12517182

Manufacturer Part Number

N017592SV

This is a valve plate for your compressor or generator. This part controls the air flow into the pump. When the air is pumped by the piston, it passes through the valve plate and into the compressor tank. The most common sign of a damaged valve is if your pressure is not building up in the tank. The reeds on the valve plate are usually the first thing to wear out. If you notice visible damage on the reeds you will need to replace this part. This valve includes the plate, and the lower gasket. The head gasket is sold individually.

Fix Number

FIX16760404

Manufacturer Part Number

RE206202AV

This is a genuine Campbell Hausfeld replacement part designed for use with air compressors. It is used to regulate the air pressure in the compressor tank. It is also used to regulate the air pressure of the air exiting the tank. In some instances you will need to lower or higher the air pressure of the tank and the air coming from the tank. It is made out of metal with a plastic knob. This regulator is sold individually. To complete this repair you would need a set of wrenches.

★★★★★

★★★★★

2 Reviews

Fix Number

FIX12511523

Manufacturer Part Number

Z-AC-0032

This replacement valve plate assembly is a high quality item designed for use on Craftsman air compressors. It is a genuine manufacturer sourced item that is used to control the airflow into the cylinder. Once the piston starts traveling up, the reeds on the valve plate open and air is sent into the air tank. Overtime the reeds will get worn eventually requiring valve plate replacement. One metal valve plate with reed valves and two rubber seals are included in this assembly. When replacing this valve plate assembly it is also a good time to replace the head gaskets which are sold separately. You will need a wrench set to complete this repair.

Fix Number

FIX9889505

Manufacturer Part Number

132BV

This is a genuine Rolair replacement part. During regular operation of you compressor condensation builds up in the compressors tank, this drain valve allows you to open the tank up, release the pressure, and let the moisture out. Just one quarter turn opens the drain valve fully. This drain valve is made of metal, and it has male threads. Due to the constant contact with moisture the drain valve will rust, disintegrate, and get clogged over time. Each drain valve is sold individually. To replace your drain valve you will need a wrench, this help ensure you have securely attached the valve to the tank. Before you start any repairs on an air compressor unplug the machine, and make sure to drain the air out of the compressor tank.

Fix Number

FIX17016281

Manufacturer Part Number

SR060513SV

This is a genuine Campbell Hausfeld replacement drain valve, sold individually. When using an air compressor, moisture naturally condenses inside the tank. If this water is left sitting for too long, it can lead to internal rust and damage. The drain valve allows you to release this built-up moisture easily. It's especially important to drain your tank after each use—particularly if you tend to leave air in the tank for extended periods. Regular draining helps extend the life of your compressor and maintain its performance. Be sure to open the valve regularly to prevent water buildup and potential tank corrosion.

Fix Number

FIX18990718

Manufacturer Part Number

A19712

This check valve is used to direct air from the cylinder to the tank, and to prevent air from going back into the pump. It is a genuine OEM part used on air compressors. It features threaded fittings to attach it to the tank, pump, and pressure switch. A faulty check valve can cause the pump to restart even with a full tank, that in turn can overload the motor. This brass part is sold individually, and the tubes are sold separately. Always make sure to drain the tank before beginning the repair.

★★★★★

★★★★★

1 Review

Fix Number

FIX12099547

Manufacturer Part Number

E106920

The Husky regulator manifold body is part of a large line of genuine replacement parts. This regulator manifold body is constructed with heavy duty aluminum. It accommodates tank and regulated gauges.

Fix Number

FIX10087975

Manufacturer Part Number

131B

Pilot Unloader Valve - 1/4" Tube, Pilot 1/4" M NPT