Circular Saw Switches

Fix Number

FIX10123797

Manufacturer Part Number

23-66-2635

Intermittent motor operation, a sticking trigger, or failure to start can point to a damaged saw switch, but several nearby components can cause the same symptoms. Check the battery charge, terminals, lockout button, loose wires, and control electronics before ordering a replacement. The switch mounts inside the handle and responds when the operator presses the trigger after releasing the safety lock. Match it to the exact tool model and serial prefix. Remove the battery and cutting blade before service, then note the position of each wire and terminal. Avoid pinched wires during reassembly. Test that the lockout blocks accidental starting and that the motor stops when the trigger is released.

Fix Number

FIX10153579

Manufacturer Part Number

651172-0

This trigger switch is for circular saws. Trigger switch starts and stops the circular saw. Unplug the circular saw before installing this part. Wear work gloves to protect your hands.

★★★★★

★★★★★

1 Review

Fix Number

FIX10123482

Manufacturer Part Number

23-66-0177

This is an OEM trigger switch with four internal terminals. The switch controls the on/off and varying speed functions. It is common for the switch of a power tool to wear and malfunction over the use of a tool and require replacement. A few signs that will indicate a replacement is need is If the tool will not turn on when you engage the switch, it requires multiple tries to turn on, or the variable speeds are not working.

Fix Number

FIX16641271

Manufacturer Part Number

4870621001

This authentic Skil replacement part is responsible for controlling the on and off function of a saw. If your unit randomly stops or it takes several pushes on the trigger to get it going, installing a new switch may resolve the issues. Please note this plastic switch is sold individually. Includes four (4) screws. To complete this repair job you will need a screwdriver. • Remove housing screws • Separate housing from the main unit • Take a note of how the wires are connected • Disconnect wires from the old switch • Remove the switch and secure new one in place • Reconnect the wires • Reassemble the housing and test the unit

Fix Number

FIX10153580

Manufacturer Part Number

651189-3

This genuine OEM replacement part used on some Makita Circular Saws. This is a Plastic Switch and it is sold individually. Switches are commonly replaced parts in power tools. A switch handles on/off and variable speed functions. They also have a role in electric breaking; they can momentarily reverse electrical polarity. Because switches use mechanical internals, they will degrade and wear out over time, eventually requiring replacement.

Fix Number

FIX12091571

Manufacturer Part Number

23-66-0126

This is an authentic OEM sourced replacement switch assembly that is designed for use with Milwaukee saws. It allows user to turn the tool on and off. Switches are a commonly replaced part in power tools, over time mechanical components may begin to fail eventually requiring replacement. Please note this durable plastic switch assembly is sold individually.

★★★★★

★★★★★

1 Review

Fix Number

FIX19512008

Manufacturer Part Number

2610321608

★★★★★

★★★★★

1 Review

Fix Number

FIX10173180

Manufacturer Part Number

429977-00

This Dewalt switch is a common replacement part and is compatible with the Dewalt tools listed below. This switch is a genuine Dewalt replacement part. It is a standard on/off switch and has four terminals. This switch has its four terminals located on the bottom, not the side, of the body but it is fully compatible with both configurations.

Fix Number

FIX17071349

Manufacturer Part Number

23-66-5027

Fix Number

FIX10128948

Manufacturer Part Number

42-42-0345