Belt or Drum Sander Belts

Fix Number

FIX10087110

Manufacturer Part Number

BD46075

This is a drive belt for a sander. It is what drives the sanding belt. The belt can wear over the years and will require replacement. It usually shows its wear in the form of cracks, fraying or breakage. The cogs can also start to wear making it difficult to grip properly. For this repair, use your Phillips head screwdriver to remove the screws securing the pulley cover and the motor cover. Place your unit in the vertical standing position and then loosen the hex head set screw. Raise the motor pulley to release the belt tension. Place the new drive belt on the drive pulley first and then the motor pulley. Test the tension of the belt with your fingers. Adjust the belt tension until there is a 1/4-inch give and then tighten the belt tension nut.

Fix Number

FIX19509004

Manufacturer Part Number

2604736010

Fix Number

FIX10180446

Manufacturer Part Number

587263-00

This is a genuine OEM sourced replacement belt used on Bosch sanders. This is the main drive belt for the unit. This item is made out of rubber and it is sold individually. It is recommended to replace these belts every 6 months to ensure optimum performance. You would need a screwdriver to complete a repair. • Remove the belt cover • Replace the old belt with the new one • Secure the housing

Fix Number

FIX10326481

Manufacturer Part Number

655503-00

This genuine item is supplied by the original equipment manufacturer for use with Delta drum sanders. It is an identical replacement for a worn, a damaged or a missing belt that was installed on a new equipment. A new belt will usually be tighter on one side than the other. Frequent adjustments are normal for the first few hours due to belt stretch. Adjustments to belt tracking can also affect belt tension. One durable belt is included. Refer to the owner's manual for your model to ensure the correct repair procedure.

Fix Number

FIX10087060

Manufacturer Part Number

BD46024

This is an authentic Ryobi replacement part that has been sourced from the original manufacturer to be used with belt and disc sanders. The sanding belt fits over the rollers and is used to wear down material. This item is available as an individual replacement part.

Fix Number

FIX16639741

Manufacturer Part Number

3121034002

This is a genuine Skil drive belt, not an aftermarket imitation. It is sourced directly from original equipment manufacturer for use on belt sanders. It is the main belt that would drive the unit. This part is made out of rubber and is sold individually.

Fix Number

FIX10185494

Manufacturer Part Number

90511237

This is an authentic item which is supplied by the original manufacturer for use with DeWALT and Black and Decker belt sanders. It is an identical replacement for a worn or stretched timing belt that is attached to the drive pulley, make sure to refer to the appropriate diagram of your model for the correct location and application of this component. Keep in mind this high-quality item is made of durable rubber material and is sold individually.

Fix Number

FIX10128558

Manufacturer Part Number

42-25-2511

This is a genuine OEM supplied belt which is specially designed for use with Milwaukee power tools. It is an identical replacement for a missing or damaged timing belt that was originally installed on a new unit, please make sure to check the appropriate diagrams of your model for the correct location and application of this component. Keep in mind this high-quality item is made of durable rubber and is sold individually.

Fix Number

FIX10322228

Manufacturer Part Number

406131330004

This is a genuine Delta replacement part that has been sourced from the original manufacturer to be used with drum sanders. The durable poly v-belt is used to connect the motor pulley and the drum pulley. This part allows the motor to drive the drum. The belt is sold as an individual replacement part.

★★★★★

★★★★★

1 Review

Fix Number

FIX11855322

Manufacturer Part Number

039820001041