Band Saw Wheels and Rollers

Fix Number

FIX10128569

Manufacturer Part Number

42-28-0025

This is an authentic OEM rear roller kit for a band saw. It includes the metal mounting bracket, the lateral blade guide rollers, and the thrust guide roller, which all comes preassembled and ready to mount to your saw as-is. This kit also includes two mounting screws. The roller assembly is prone to wear due to its contact with the blade. The bearings can wear, which can cause them to seize. The metal mount can also become damaged if the blade makes contact. For this simple repair, remove the rear guard to expose the rear roller. Remove the roller and install your new one. There is a pin located on the back of the roller assembly, which aligns with the housing. Once you have it properly aligned, reinstall the screws and then the rear guard.

Fix Number

FIX10128491

Manufacturer Part Number

42-24-0015

This is an authentic Milwaukee replacement part that is sourced from the original manufacturer to be used with portable band saws. The front roller guide is a complete replacement part assembly. This item attaches to the pulley support and is used to support the blade and to keep it on track. This item is priced as a single item.

Fix Number

FIX9963925

Manufacturer Part Number

5140103-20

It is a genuine manufacturer approved replacement wheel tire which is specially designed for Dewalt band saws. Its purpose is to provide grip for the saw blade. When putting the tire on a band saw wheel, it may seem too small but it is not. band saw tires will typically come approximately 2 or more inches smaller than the Tire you're replacing. As the tire ages the rubber will harden and allowing the blade to slip. You would need to put the new tire in hot/warm water to heat the tire enough to make it pliable enough to stretch. Its preferred to use two people in the stretching process. This part is made out of rubber and is sold individually.

Fix Number

FIX18981774

Manufacturer Part Number

5140075-34

Genuine Porter Cable Wheel Tire for Band Saw. This part is made out of Rubber and is Sold Individually. When putting the tire on a band saw Wheel, it may seem too small but it is not. Band saw Tires will typically come approximately 2 or more inches smaller than the Tire you're replacing. The old Tire stretches over time thus becoming less effective and eventually will break. Also, as Tire ages the rubber hardens and allows the Blade to slip. You would need to put the New Tire in Hot/Warm Water to heat the tire enough to make it pliable enough to stretch. Its preferred to use two people in the stretching process.

Fix Number

FIX9963948

Manufacturer Part Number

5140103-44

This is an authentic DeWalt replacement part manufactured for use in portable band saws. This metal roller allows the blade to move through the guides. The roller is sold individually, although four are required.

Fix Number

FIX10151048

Manufacturer Part Number

421333-4

Genuine Manufacturer Approved replacement Wheel Tire for some Makita Bandsaws. This part is made out of Rubber and is Sold Individually. When putting the tire on a band saw Wheel, it may seem too small but it is not. Band saw Tires will typically come approximately 2 or more inches smaller than the Tire you're replacing. The old Tire stretches over time thus becoming less effective and eventually will break. Also, as Tire ages the rubber hardens and allows the Blade to slip. You would need to put the New Tire in Hot/Warm Water to heat the tire enough to make it pliable enough to stretch. Its preferred to use two people in the stretching process.

★★★★★

★★★★★

1 Review

Fix Number

FIX9871838

Manufacturer Part Number

089120406067

This is an authentic Ryobi replacement part, and is sold individually. The bandsaw tire is an essential part of the band saw. It keeps the blade tracking correctly on the wheel. Overtime the belt will become stretched or cracked and you will notice the blade not tracking properly. This would be the time to change it. It is advised to change both tires instead of just one. This part is compatible with the band saws listed below.

Fix Number

FIX10151469

Manufacturer Part Number

424589-8

This high quality rubber tire is a genuine OEM sourced item that is utilized on Makita band saws. It is secured over the wheel drives the blade to provide traction. Over time these rubber tires stretch and harden allowing blade to slip. When putting the new tire on a band saw wheel it may seem too small however it really is not. These tires will typically come approximately two or more inches smaller than the old tire that is being replaced. You will need to put the new tire in warm water to heat the tire making it pliable enough to stretch. Please note one durable rubber tire is included per order.

Fix Number

FIX10322477

Manufacturer Part Number

419960940002

Genuine Delta Polyurethane Upper Wheel Tire for 16" Bandsaw. When putting the tire on a band saw Wheel, it may seem too small but it is not. Band saw Tires will typically come approximately 2 or more inches smaller than the Tire you're replacing. The old Tire stretches over time thus becoming less effective and eventually will break. Also, as Tire ages the rubber hardens and allows the Blade to slip. You would need to put the New Tire in Hot/Warm Water to heat the tire enough to make it pliable enough to stretch. Its preferred to use two people in the stretching process.

Fix Number

FIX10128328

Manufacturer Part Number

42-12-0010

This is a genuine Milwaukee replacement part that has been sourced from the original manufacturer to be used with portable bandsaws. The metal shaft is used to mount and drive the saw's wheels that rotate the blade. This item is available as an individual replacement part, please see illustrated diagram for associative parts.