Band Saw Blades

★★★★★

★★★★★

2 Reviews

Fix Number

FIX10133097

Manufacturer Part Number

45-69-0010

This is an authentic blade pulley tire. This part is sold individually, however two tires are needed on the bandsaw. If one tire needs to be replaced, it is recommended by the manufacturer to replace them both at the same time. The blade pulley tire is what keeps the blade tracking accurately. They are a common wear part that will become brittle or stretched out over time. This leads to the blade coming off the pulleys or not tracking correctly. This is a very simple repair, the tire stretches onto the pulleys, no disassembly required.

Fix Number

FIX10128580

Manufacturer Part Number

42-28-0206

This is an authentic front blade guide assembly for a band saw. The purpose of this part is to keep the blade steady, so it cuts in a straight line. It also supports the rear wheel blade. This part consists of a guide block and three bearing guides. Over time the bearings will wear and can cease and the block itself can get damaged by the blade. For this quick and simple repair, you will need to unfasten the screws holding it in place with a screwdriver. If the screw is hard to reach, adjust the tension and this will help to bring the housing forward so you can fit your screwdriver in place.

★★★★★

★★★★★

1 Review

Fix Number

FIX10124943

Manufacturer Part Number

28-95-0120

Genuine Milwaukee replacement part, this item is sold individually. This is the part of the Portable Bandsaws listed below that the blade is installed on. The part number 45-69-0010 Blade Pulley Tire must be used with the pulley for the blade to track properly.

Fix Number

FIX16395041

Manufacturer Part Number

682277001

Fix Number

FIX10516511

Manufacturer Part Number

5783391

This part is an OEM from the Wilton manufacturer. The carbine blade guard is compatible with many band saw devices. The plastic item is fitted on each side of the saw head's support bracket, keeping the blade straight for cutting projects. A pair of pliers and a screwdriver may be helpful for making the repair. The carbine blade guard is sold individually.

Fix Number

FIX10133907

Manufacturer Part Number

48-39-0510

<style type="text/css"> <!-- .style1 {font-size: 11px} .style5 {font-size: 11px; font-weight: bold; } --> </style> <div> <p class="style1"> Band Saw Blade Bi-Metal 14 Teeth per Inch 44-7/8 in. Milwaukee Bi-Metal Super-Tough Band Saw blades outlast conventional blades up to 3 times, requiring fewer blade changes. An extremely hard and uniform tooth point is electron beam welded to a tough durable backing with high flex life for faster cutting and longer blade life. Recommended for cutting aluminum, angle iron, bronze, brass, copper, galvanized pipe, mild steel and tougher steels including stainless, chrome, tungsten steel plus other problem material at slow speed. Includes one blade. <table cellpadding="0" cellspacing="0" bgcolor="#000000"> <tr> <td> <span class="style1"> </span> <table width="100%" border="0" cellpadding="2" cellspacing="0" bordercolor="#000000"> <tbody> <tr> <td colspan="3" bgcolor="#FFFFFF" class="style1">Features</td> </tr> <tr> <td bgcolor="#FFFFFF" class="style1"> • </td> <td bgcolor="#FFFFFF" class="style1"> 14 TPI, Bi-Metal Construction</td> </tr> <tr> <td bgcolor="#FFFFFF" class="style1"> • </td> <td bgcolor="#FFFFFF" class="style1"> Matrix II high speed steel teeth with 8% cobalt</td> </tr> <tr> <td bgcolor="#FFFFFF" class="style1"> • </td> <td bgcolor="#FFFFFF" class="style1"> For cutting stock 3/16 in. to 5/16 in. thick</td> </tr> <tr> <td bgcolor="#FFFFFF" class="style1"> • </td> <td bgcolor="#FFFFFF" class="style1"> For use with portable band saws using 44-7/8 in. x 1/2 in. x .020 in. blades</td> </tr> </tbody> </table></td> </tr> </table>

Fix Number

FIX10132423

Manufacturer Part Number

45-08-0172

The blade release shaft goes between the needle bearing and the front pulley guard. It is made out of metal and is sold individually. This is an OEM Milwaukee part directly sourced from the manufacturer for use in bandsaws. When replacing this part an allen wrench might be required during the installation process. It will require replacing if it breaks.

Fix Number

FIX19159538

Manufacturer Part Number

JT9-JWBS14DP-76

Fix Number

FIX10378621

Manufacturer Part Number

414301

This is a genuine item that is supplied directly from the original equipment manufacturer for use with Jet bandsaws. It is a high-quality replacement for a worn or missing blade that is used to cut the material, please make sure to refer to the owners manual for the correct application of this component. To free up the old bandsaw blade, simply remove the tension from the blade and the parts holding it in the saw. Please note this part is made of durable metal and is sold individually.

Fix Number

FIX9871887

Manufacturer Part Number

089120406124

It is an authentic OEM sourced replacement part that is specially produced for use with a Ryobi band saw. This is a standard 1/4 in. high-quality steel blade that is sold individually. Adjustments of blade tension can be made at anytime. Thicker workpieces require higher tension, however maximum tension is not needed for all cuts. Too little tension may cause the blade to slip on the wheels and too much tension may cause the blade to break.