Metabo Angle Grinder Switches

Fix Number

FIX12043744

Manufacturer Part Number

343437100

This is an original component from the Metabo manufacturer. The plastic slide switch is made for use with several angle grinder devices. Fastened to the switch rod in the housing, this item allows the operator to (de)activate the tool. To complete this repair, you will need a hex key and a screwdriver. The slide switch is sold individually.

Fix Number

FIX10418578

Manufacturer Part Number

343392980

Genuine Metabo replacement part, this is sold individually. The Switch Slide, which is near the front of the Metabo Grinders shown below. Attaches to the Switch Rod,the Switch Rod then attaches to the Switch. The Switch Slide is pressed forward which pulls the Switch Rod forward and activates the Switch. After the Grinder is in operation, you can press down on the Slide Switch to lock the Grinder in the on position. To unlock the Switch Slide, simply press on it and it will stop the Grinder.

Fix Number

FIX10418350

Manufacturer Part Number

343373650

This replacement slider switch knob is a genuine metabo part. It is supplied directly from manufacturer for use with grinders/polishers. It is the slider knob for the main on/off switch of a tool. This slider is made out of black plastic and it is sold individually. Replacing this switch slider should only require a screwdriver. • Make sure the tool is unplugged • Remove the housing screws • Remove the slider and secure the new one in place • Reassemble and test the unit

Fix Number

FIX10418690

Manufacturer Part Number

343406730

This high quality replacement switch is used on Metabo power tools. It is an authentic OEM sourced item, not an aftermarket imitation. It is the mechanical switch that allows user to turn the tool on and off. Since switches have moving plastic parts, they will eventually wear out and fail requiring a replacement. Please note, one switch is included per order. To complete this repair you will need a screwdriver. • Remove the housing • Disconnect wires from the old switch • Remove the old switch • Secure the new switch in place • Connect wires to it • Reassemble and test the tool

Fix Number

FIX10418583

Manufacturer Part Number

343393110

Original Manufacturer Sourced replacement part used on some Metabo Angle Grinders. This part is made out of Plastic and it is Sold Individually. This part acts as a bridge/handle for the Switch to operate. If this part is broken you would not be able to operate the tool.

Fix Number

FIX10418595

Manufacturer Part Number

343393530

This is a genuine Metabo replacement part that has been sourced from the original manufacturer to be used with angle grinders. The durable plastic switch rod fits into the main housing. This item is used to link the internal switch with the switch button. This part is sold as an individual replacement part.

Fix Number

FIX10418740

Manufacturer Part Number

343409550

This item is sold individually. The switch is made out of plastic and metal. When replacing this part a screwdriver might be required during the installation process. It will need to be replaced if it breaks. This authentic item is supplied directly from the original equipment manufacturer for use with Metabo bench grinders.

Fix Number

FIX17757707

Manufacturer Part Number

343409180

Fix Number

FIX12043733

Manufacturer Part Number

343433070

Fix Number

FIX10418672

Manufacturer Part Number

343404230

This is an authentic replacement part manufactured for Metabo electric power tools. The special switch is used to relay electricity from the power cord to the motor assembly and is used with a variety of different power tools. This special switch is available as an individual replacement part, please see tool model's part list for compatibility.