Craftsman Angle Grinder Bearings

Fix Number

FIX10188594

Manufacturer Part Number

N130916

This is an authentic OEM replacement part for certain models of DeWalt Grinders that has been sourced directly from DeWalt. To ensure that this will fit your grinder, please see the "Model Cross Reference List" below. The Ball Bearing fits between the bearing cup and the slinger, and its primary purpose is to reduce friction to allow the device to operate smoothly. Ball Bearings experience constant wear from the pressure, heat, vibration, and friction of the grinder, and may need to be replaced periodically as a result. Signs of broken or failing Ball Bearings include squealing, screeching, or grinding noise when powering the device off. This part has a diameter of approximately 3/4", made of metal, and is sold individually.

★★★★★

★★★★★

1 Review

Fix Number

FIX10169632

Manufacturer Part Number

330003-64

This is a ball bearing for your power tools. It is used in a variety of machines for rotary motion. The bearings support your tools by lowering the friction, which allows easy rotation of moving parts. Depending on how often you use your tool the bearings are a commonly replaced part. This is because they will experience most of the pressure, heat, and vibrations.

Fix Number

FIX10183374

Manufacturer Part Number

641823-00

The bearing cup is an OEM sourced part that is used with Craftsman angle grinders. This is not an aftermarket imitation part. This item is used to secure the bearing on the commutator side of the armature within the motor housing assembly. This item is available as an individual replacement part.

Fix Number

FIX10169630

Manufacturer Part Number

330003-60

This is a bearing, and it is used in various power tools. It is meant to reduce tension between the moving parts within the tool. This bearing has a 1 inch outer diameter, less than 1/4-inch inner diameter, and green walls.

Fix Number

FIX10180915

Manufacturer Part Number

605040-60

• Ball bearings allow rotating parts to move smoothly by reducing friction. The weight is distributed evenly among the balls, which reduce friction by rolling. This helps guarantee long tool life by reducing the wear and allowing it to run smoothly. Vibration, friction, heat and pressure can cause wear on the bearing while the tool is being used. Bearings sometimes require replacement or maintenance because of this.

Fix Number

FIX10180906

Manufacturer Part Number

605040-03

Fix Number

FIX10180908

Manufacturer Part Number

605040-22

This is an OEM part sourced directly from the manufacturer. The bearing is commonly found in grinders and sanders from DeWALT and Black & Decker. This part is made of metal, and is generally placed to allow the spindle to spin freely. You will require a screwdriver when replacing this item. This product is available as an individual replacement part.

Fix Number

FIX10185737

Manufacturer Part Number

930275-00

It is an authentic item that is supplied directly from the original manufacturer for use with DeWALT and Black and Decker equipment. This is the special spring cover for bearings utilized on the tools. It provides an identical replacement for a missing or a damaged hardware that was installed on a new unit. To ensure the correct application of this component please make sure to refer to the owners manual and the appropriate diagram of your model. Note, one high-quality bearing cover is included.

Fix Number

FIX10205363

Manufacturer Part Number

254443

Fix Number

FIX10166375

Manufacturer Part Number

150057-00