10105296-1-M-Ridgid-JE080008-Blade
Part Location Diagram of JE080008 Ridgid Blade
See part B3 in the diagram
( Grid squares measure 1x1 inch )
10105296-1-S-Ridgid-JE080008-Blade Part Location Diagram of JE080008 Ridgid Blade

Blade JE080008

$ 19.09
No Longer Available

No Longer Available

Sorry, this part is No Longer Available at Fix.com, which means:

  • The part is no longer sold by the manufacturer.
  • The manufacturer does not stock any substitute parts to replace this one and therefore, unfortunately, we cannot obtain or recommend a substitution for this part.
  • We cannot obtain the part through any other means.

Our call center and online agents are, unfortunately, unable to help you locate this part, but you may still be able to find the part elsewhere. We recommend:

  • Typing your part number into a search engine and checking to see whether another company might stock it.
  • Searching online stores like eBay for your part number.
  • Visiting a local appliance store or parts dealer to see if they have this part in stock.
  • Contacting a local technician, who may be able to repair your existing part or replace it with their own solution.
  • Contacting the manufacturer of your appliance directly to check for their recommendations.
Fix Number:
FIX10105296
Manufacturer #:
JE080008
Manufactured by:
Ridgid

Product Description

Genuine Ridgid replacement part, this item is sold individually. There are three of these Blade use in the Ridgid Jointer/Planer Machines listed below. These blades can be sharpened a few times, after that they become too short to be used in the jointer. When you install the Blades you want to make sure they are the exact same height of the out feed table. Make sure the cutterhead is at top dead center when you install them. The Blades are spring loaded, so you can use a straight edge on the out feed table. Bring it down on the blade then tighten the bolts.

  • Works with the following brands:
    Ridgid
  • Works with the following products:
    Planer Jointer