Part Location Diagram of 1313113 DeWALT BRUSH
See part 129 in the diagram
( Grid squares measure 1x1 inch )

BRUSH 1313113

Works With Model CMEW320!

Rated by 1 customers 

?

Very Easy 

30 - 60 mins 

Ratings submitted by customers like you who bought this part.

?
$15.82
In Stock
Fix Number:
FIX18979810
Manufacturer #:
1313113
Manufactured by:
DeWALT
Works With Model CMEW320!

Product Description

This is a carbon brush set for your power tools, most commonly your planer jointer. Two of these brushes are needed for most power tools, and this purchase only includes one. If you are having troubles with electric braking, or motor functions, you should replace your carbon brushes. We recommend replacing both brushes together, to create an even wear. This is a part that is replaced often in power tools because of the constant friction during operation. When making this installation we recommend inspecting the armature for visible damage that could prove larger motor issues.

Questions and Answers

We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.

Installation Instructions Provided by Fix customers like you.

Average Repair Rating: 4.3 / 5.0, 1 reviews.
  • 1
Sort by:
Sorry, we couldn't find any existing installation instruction that matched.
Customer:
Dwayne from Millville, NJ
Parts Used:
34-674, 1313113
Difficulty Level:
Very Easy
Total Repair Time:
30 - 60 mins
Tools:
Screw drivers
Broken belt (motor runs, blade didn't turn)
1) Watched YouTube video before ordering parts to confirm my problem and to get an overview of the repair.
2) found 7-step instruction in user manual - worked perfectly (Part# 901608 (014) downloaded PDF) on page 26
Turned saw over and layed on two 2x8s to protect spindle and it case I dropped the saw. Use a helper if you have one but I did not need one.
3) inspected motor brushes per user manual (had spares ready) 4-step instructions (two brushes) on page 25
4) used stiff brush to clean parts and screw shafts while saw was upside down
5) re-assembled, tested saw, double verified that blade tilt was still at Zero degrees when return to 0 and fense and blade were still parallel.

Cleaning and testing took as long as changing the belt and inspecting brushes.
2 of 3 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
  • 1

Model Compatibility

This part works with the following models:
Fix Number: FIX18979810
Manufacturer Part Number: 1313113
Brand Model Number Description
Porter Cable 1400 Chop Saw - 14 inch Abrasive Cut Off Machine
Delta 20-150 Chop Saw - Cut Off Saw
Delta 22-540 Planer Jointer - Planer
Delta 22-560 Planer Jointer - Planer
Delta 22-565 Planer Jointer - Planer
Delta 22-580 Planer Jointer - Planer
Delta 34-080 Miter Saw - 10&#34 Miter Saw
Delta 34-670 Table Saw - 10 Inch Table Saw
Delta 36-325C Saw - Saw
Delta 36-600 Table Saw - Table Saw
Delta 36-610 Table Saw - Table Saw
Delta 36-670 Saw - Saw
Craftsman CMEW320 Planer Jointer - Planer
Porter Cable PC305TP Planer Jointer - 12 inch Planer
Delta TP300 Planer Jointer - Planer
Delta TP305 Planer Jointer - 12-1/2" Portable Planer
Delta TP400LS Planer Jointer - 12-1/2&#34 Planer
Delta TS300 Table Saw - Bench Table Saw