( Grid squares measure 1x1 inch )

BELT N430442

$6.54

Fix Number:: FIX12529381
Manufacturer #:: N430442
Manufactured by:: DeWALT

Jump to:

Product Description
Questions and Answers
Related Parts
Model Compatibility

Product Description

This part includes a single belt for a random orbital sander. It is located between the pad and the sander body. It helps to control the pad speed while the tool is off the work surface. The belt is a common wear part that will require replacement from time to time (along with the pad, which is sold separately). The belt should be replaced when the pad speed increase significantly when the unit is removed from the work piece. For this repair, remove the screws holding the pad in place, remove the pad, replace the damaged belt by wrapping it around the shoulder screw and bearing retainer. Reinstall the pad and re-tighten the screws, being careful not to over-tighten them.

Works with the following brands:

DeWALT, Craftsman
Works with the following products:
Orbital or Palm Sander, Lawn & Garden

Works with the following brands:: DeWALT, Craftsman
Works with the following products: Orbital or Palm Sander, Lawn & Garden

Questions and Answers

We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.

1 question answered by our experts.

< Prev
1
Next >

Sort by:

Caty

November 4, 2023

Trying to replace belt

For model number Dwe6421

Hello Caty, thank you for reaching out. We are providing you with the instructions that will help you in replacing the drive belt. Remove the fasteners that secure the housing cover. Locate the old belt and note how it is routed before removing it from the sander. Position the new belt in the sander and ensure that it is aligned and adequately tensioned. Reattach the housing cover and secure it with the appropriate screws. We hope this helps!

Was this helpful?