This is a genuine OEM worm following gear for your stand-up mixer. The gear is made of metal and is attached to the planetary shaft. This is an important part of the appliance as it helps to drive the beaters for your mixer. Over time, the teeth on the gear can become stripped or worn down, and it will need to be replaced. Signs that you may need to replace this gear are if the mixer is not spinning, or if it making excessive noise. Please be sure to unplug the mixer before beginning this repair.
Works with the following brands:
KitchenAid, Whirlpool
Works with the following products:
Mixer
Fixes the following symptoms:
Touchpad does not respond
Part# W11086780 replaces these:
AP6048307, 9703543, 9706529, W10916068, WP9706529
Works with the following brands:
KitchenAid, Whirlpool
Works with the following products
Mixer
Fixes the following symptoms
Touchpad does not respond
Part Number Cross Reference
Part# W11086780 replaces these:
AP6048307, 9703543, 9706529, W10916068, WP9706529
Questions and Answers
Ask our experts a question about this part and we'll get back to you as soon as possible!
2 questions answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched. Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
William
October 6, 2021
Is my model the same as the model that has a 5 at the end? For example "kp26m1xwh5" vs "kp26m1xwh" without the 5. Will parts be compatible between the two?
For model number KP26M1XWH
Hello William, Thank you for the question. The Internal part for KP26M1XWH5 and KP26M1XWH5 are the same. The 5 indicates Color of the appliance. We hope this helps!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Duane
March 7, 2022
Model # KG25H7XOB 5QT S/N WR4452263. Is this the correct Worm Following Gear for our mixer? Manufacturer #W11086780. Thanks for your help.
For model number KG25H7X0B
Hello Duane, Thank you for contacting us. We have researched the model you have provided and have confirmed the part you are looking for is Fix Number: FIX12070620. If you need help placing an order, customer service is open 7 days a week. Please feel free to give us a call. We look forward to hearing from you!
1 person found this helpful.
Was this helpful?
Thank you for voting!
✖
Ask a Question
Ask our experts a question on this part and we'll respond as soon as we can.
This hub gear is a genuine OEM replacement part for your stand mixer. This kit includes both the beveled gear and attachment and is also referred to as a worm follower gear. This gear assists with the rotation of the pla...
This front load washer cleaner removes odor-causing residue. Use it once a month and it will keep your machine fresh and clean. Package comes with 3 tablets.
Fresh Flow Produce Preserver is made for your refrigerator to help keep produce fresh for longer by absorbing the chemical, ethylene, that causes your fruits and vegetables to ripen quicker. Your produce could be fresh f...
Affresh dishwasher Cleaner is specially formulated to help remove limescale and mineral build-up that can be unsightly and could affect your dishwasher's performance. Each tablet is designed to clean inside your machine ...
Make your cooktop shine with Frigidaire ReadyClean Glass and Ceramic Cleaner. Our scratch-free, streak-free formula removes smudges, grease, burnt-on food, dirt and oil, while protecting and polishing to repel dust and d...
I removed the 5 screws holding the cover. They were square but you can use a Phillips driver. Then I removed the cover on the transmission. All the gears have a place fairly easy to see where they all fit together. The only thing is there is a clip on the main shaft it will need to removed. If you don't have a clip spreader you'll need 2
... Read morescrew drivers (flat ones). One to spread open the clip and one to slide up the clip take your time. There are two gears on top of each other. Remove the top gear set aside the bottom gear has a pin through the main shaft just pop it out set aside. Here is where the hammer comes in to play. Tap the shaft lightly while holding the mixer connector underneath. The gear is on the shaft snug. Now you'll have to remove the all the grease and replace with new grease. Install the new gear in reverse order. Then add the new grease. Take you time and clean the gasket on the transmission cover before you install it. Test before you install the cover. If all sounds good install the rest of the parts.
Watched the video several times. Once I received the parts, I watched it again to see specific sections. Repair was easy when I knew what to expect. It would help if the video could be in sections, so you would not have to watch the entire beginning in order to see later instructions. Also found the parts manual on line and ordering of pa
... Read morerts was very easy and processed correctly by your company. Really appreciated your help.
The reason I put very difficult and more than 2 hours is not because it is really difficult but because I still have not received the retaining pin from fix.com. We received the other three parts, but not the retaining pin, so I still can't complete the project. I emailed them to let them know 26 days ago, and they still have not responde
... Read mored. You are not able to speak to anyone on the phone either. Extremely poor customer service!
Unplugged kitchen aide pro mixer Used a square bit on drill to unscrew trim piece from mixer Used same bit to remove top of mixer and again to expose the gears. Used special pliers to remove the retaining ring. Pulled off the top gear Slid out a pin Pulled off the worm gear Replaced worm gear replaced pi
... Read moren replaced top gear used pliers to replace retaining ring. Reassembled the mixer with drill.
I stripped the worm gear by overloading the mixer with bread dough.
It is very easy to get the mixer housing apart by removing the screws. the gears and drive are easy to get at and see after the grease is removed. The drive assembly is held on the shaft with a snap ring that that must have a good set of snap ring pliers to remove. After removing the stripped gear it is just a mater of replacing it with
... Read morethe new one. It is easy to see what has to be done. I would like to thank this site for for the super fast service. Jim
Steps: disassemble, clean, reassemble with new gear and new grease.
I used paint thinner to clean up and wash the old grease, kerosene would also be acceptable. In my case I used a solvent tank with a pump, since I have one, but it would have worked with solvent in a pan and a solvent brush. Then I let the cleaned parts dry ov
... Read moreernight, though compressed air may have worked just as well.
I could not find in instructions what grease should be used.
Followed instructions
0 of 1 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
< Prev
1
2
Next >
★
Customer Reviews
Average Rating:
(3 Reviews)
5.0
★★★★★
★★★★★
Filter By Rating:
5★
3
4★
0
3★
0
2★
0
1★
0
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Araceli L - February 3, 2023
Verified Purchase
Mixer gear
Got my mixer up and running like new. I probably didn’t need to, but I changed out the worm gear and bearings as well. Also repacked with fresh grease. Was actually fun!
★★★★★
★★★★★
Stephen G - March 22, 2022
Verified Purchase
Perfect fit
High quality steel gear fit right into my KitchenAid mixer gearbox.
★★★★★
★★★★★
Lisle B - July 2, 2021
Verified Purchase
Great Place
They shipped within 2hours of my order. Got it right.
Breath of fresh air.
Model Compatibility
This part works with the following models:
Fix Number: FIX12070620
Manufacturer Part Number: W11086780
Item is in stock and will ship today if your order is placed before 4:00 PM Eastern Standard Time.
If your order is placed after 4:00 PM EST, the in stock items will ship on the next business day.
On Order
Item is not in stock and usually ships 3-5 business days from the time you place your order.
Special Order
Item is not in stock and usually ships 10-15 business days from the time you place your order.
NLA - No Longer Available
This item is no longer being made by the manufacturer, and cannot be added to your shopping cart.
✖
Mail-In Recycling Rebate
Some of the parts we sell are eligible for mail-in rebates since we can recycle them. We will display any applicable rebates in your shopping cart. To redeem your rebate, contact Customer Service after you have received your part.
