Cap Hub Chrome
$12.34
In Stock
Fix Number: FIX11775314
Manufacturer #: W11048596
Manufactured by:
Whirlpool
-
Product Description
This cap hub is a genuine OEM replacement part for your KitchenAid mixer. The cap hub is a small part at the top of your mixer which you remove when adding an attachment such as the pastamaker. To replace this part, simply unscrew the knob to the right of the cap, and remove and replace the cap.
-
Works with the following brandsKitchenAid, Whirlpool
-
Works with the following productsMixer
-
Part Number Cross ReferencePart# W11048596 replaces these:AP6042004, 242765-2, 242765-3, 4159713, 4163469, W10753041, WP242765-2
Product Description
This cap hub is a genuine OEM replacement part for your KitchenAid mixer. The cap hub is a small part at the top of your mixer which you remove when adding an attachment such as the pastamaker. To replace this part, simply unscrew the knob to the right of the cap, and remove and replace the cap.
-
Works with the following brands:KitchenAid, Whirlpool
-
Works with the following products:Mixer
-
Part# W11048596 replaces these:AP6042004, 242765-2, 242765-3, 4159713, 4163469, W10753041 ... Show more , WP242765-2 Show less
Questions and Answers
Be the first to ask our experts a question about this part!
✖
Ask a Question
Ask our experts a question on this part and we'll respond as soon as we can.
Something went wrong. Please try again later.
Your Question Has Been Submitted!
Our experts will send you an email as soon as your question has been answered.
Related PartsAdditional or alternate parts to consider.
Installation Instructions Provided by Fix customers like you.
- < Prev
- 1
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
-
Customer:Jeffery from Omega, GA
-
Difficulty Level:Really Easy
-
Total Repair Time:30 - 60 mins
-
Tools:Screw drivers
worm gear had worn the teeth down where the mixer would not turn anymore
Removed the band around the end near where the beaters go, then remove the 4 screws holding the case together, then removed the screw holding the end cap over the motor area, then removed 6 screws from near the beaters area. Next, pulled the case apart to get to the worm gear. Remove 3 screws from the worm gear case, then took a hammer an punch and punched the pin holding the worm gear assembly together out, removed the worm gear and replaced and then did all the first steps in reverse order.
Was this instruction helpful to you?
Thank you for voting!
- < Prev
- 1
- Next >
Model Compatibility
This part works with the following models:
Fix Number: FIX11775314
Manufacturer Part Number: W11048596
Manufacturer Part Number: W11048596
Brand
Model Number
Description