Part Location Diagram of 344412-0 Makita Stopper Holder
See part 135 in the diagram
( Grid squares measure 1x1 inch )

Stopper Holder 344412-0

$ 9.17
No Longer Available

No Longer Available

Sorry, this part is No Longer Available at Fix.com, which means:

  • The part is no longer sold by the manufacturer.
  • The manufacturer does not stock any substitute parts to replace this one and therefore, unfortunately, we cannot obtain or recommend a substitution for this part.
  • We cannot obtain the part through any other means.

Our call center and online agents are, unfortunately, unable to help you locate this part, but you may still be able to find the part elsewhere. We recommend:

  • Typing your part number into a search engine and checking to see whether another company might stock it.
  • Searching online stores like eBay for your part number.
  • Visiting a local appliance store or parts dealer to see if they have this part in stock.
  • Contacting a local technician, who may be able to repair your existing part or replace it with their own solution.
  • Contacting the manufacturer of your appliance directly to check for their recommendations.
Fix Number:
FIX10148761
Manufacturer #:
344412-0
Manufactured by:
Makita

Product Description

This stopper holder in your miter saw, located in the turn base, is responsible for controlling the movement of the stopper. The stopper is an adjustable feature that allows you to lock the miter saw at specific angles, ensuring precise and consistent cutting. If you find it difficult to adjust or lock the stopper in place, it could be damaged or worn out, and it may need to be replaced. To access the turn base for replacement, consult your user guide for disassembly instructions. You will need a screwdriver and a socket or wrench. Separate the upper turn base of the miter saw from the lower base and remove the old stopper. As you reassemble your machine, install the new stopper holder. Please keep in mind that this OEM replacement part is sold separately from the stopper.