Part Location Diagram of 150710-0 Makita Sub Fence
See part 112 in the diagram
( Grid squares measure 1x1 inch )

Sub Fence 150710-0

$ 33.95
No Longer Available

No Longer Available

Sorry, this part is No Longer Available at Fix.com, which means:

  • The part is no longer sold by the manufacturer.
  • The manufacturer does not stock any substitute parts to replace this one and therefore, unfortunately, we cannot obtain or recommend a substitution for this part.
  • We cannot obtain the part through any other means.

Our call center and online agents are, unfortunately, unable to help you locate this part, but you may still be able to find the part elsewhere. We recommend:

  • Typing your part number into a search engine and checking to see whether another company might stock it.
  • Searching online stores like eBay for your part number.
  • Visiting a local appliance store or parts dealer to see if they have this part in stock.
  • Contacting a local technician, who may be able to repair your existing part or replace it with their own solution.
  • Contacting the manufacturer of your appliance directly to check for their recommendations.
Fix Number:
FIX10139207
Manufacturer #:
150710-0
Manufactured by:
Makita

Product Description

This left sub-fence in your miter saw serves as a reference surface for making cuts and provides additional support when working with longer or angled workpieces. It is connected to the guide fence, which attaches to the back of the table and acts as a resting point for the material being cut. The sub-fence includes a caution label that reminds users to set it to the left position for left bevel cuts. Over time, the sub-fence in your miter saw can wear out or get damaged. If it no longer attaches securely to the guide fence, it can impact the accuracy of your cuts. When this happens, it needs to be replaced. To do so, use a wrench and screwdriver to remove the damaged sub-fence, then install the new one by tightening it with the previously removed fasteners. Afterward, you can check the alignment of the sub-fence using a carpenter square to ensure accurate and precise cuts. Please note that this OEM replacement part is sold separately from the right sub-fence and the guide fence.