OEM Whirlpool Microwave Exterior Door Panel [8169352] | Ships Today | Fix.com
Exterior Door Panel – Part Number: 8169352
Exterior Door Panel – Part Number: 8169352 Exterior Door Panel – Part Number: 8169352 https://fixcom.azureedge.net/Schematics/Whirlpool/CUBBFHOP.gif

Exterior Door Panel

Your Price

Fix Number: FIX585917

Manufacturer #: 8169352

Manufactured by: Whirlpool

Part description

This is the exterior door panel only. Glass is sold separately.

Works with the following brands

Whirlpool

Works with the following products

Microwave

Installation Instructions Provided by Fix customers like you.

Average Repair Rating: 4.1 / 5.0, 2 reviews
Customer:
John from San Diego, CA
Parts Used:
  • Exterior Door Panel
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers
Exterior door frame was broken near handle
Fairly simple process, Remove the 2-screws on the outer edge of the door. The outer frame will come apart very easily but be careful of the glass as you'll need to clean and put it in the new frame. (There are no screws on the other side, it snaps in place.) Originally I only ordered the frame only and quickly found that the handle was broken also so before you order check to insure that the glass and handle are in good shape. Just remember, put it back the same way you removed it and you'll be ok. Good luck
0 of 1 people found these instructions helpful

Were these instructions helpful?   

Customer:
James from Princeton, NJ
Parts Used:
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers
The handel to my microwave had come off
I had some cracks in the front panel of my Microwave and the handle had come off when I tried to open the door. So I ordered the front panel and the handle for my microwave. I preyed off the front panel by placing the the screw drivers flat end under the lip of the front panel and gently prying it away from the metal door in a few seconds the panel was off. I got the screws off the old door handle and placed the new handle and took the glass from the old panel and attached it to my new front panel then placed the end of the panel at an angle starting at the end with hinges and pressed firmly with my hand also with the door open you can place you fingers around both the frame and the front panel to squeeze together and it will fit in place. Pretty easy for a amateur. The light bulbs I just replaced them one by one
0 of 1 people found these instructions helpful

Were these instructions helpful?