Vent Grille 8183948
$51.08
In Stock
- Fix Number:
- FIX391973
- Manufacturer #:
- 8183948
- Manufactured by:
- Whirlpool
Jump to:
Product Description
This white vent grille mounts on the top of the microwave above the door. Screws For This Grille Are Prt# PS389895
-
Works with the following brands:Whirlpool, Kenmore, Estate, Roper
-
Works with the following products:Microwave
-
Fixes the following symptoms:Door not closing properly
-
Part# 8183948 replaces these:AP3119831, 868773, 8183948, 4393727, 4393773, 8169463 ... Show more , 8183948 Show less
- Works with the following brands:
- Whirlpool, Kenmore, Estate, Roper
- Works with the following products
- Microwave
- Fixes the following symptoms
- Door not closing properly
- Part# 8183948 replaces these:
- AP3119831, 868773, 8183948, 4393727, 4393773, 8169463, 8183948
Part Number Cross Reference
Questions and Answers
Be the first to ask our experts a question about this part!
✖
Ask a Question
Ask our experts a question on this part and we'll respond as soon as we can.
Sorry, we couldn't find a match for "".
Here's a guide for finding your model number.
Something went wrong. Please try again later.
Your Question Has Been Submitted!
Our experts will send you an email as soon as your question has been answered.
Related Parts Additional or alternate parts to consider.
Installation Instructions Provided by Fix customers like you.
- < Prev
- 1
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Broken grill clips & cracked d00r cover
Used putty knife & pried Door cover off after removing 3 screws from Door. Removed handle & reapplied to new cover. Pressed Door cover on, applied screws than closed door, all done. TV
1 of 2 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Filters and grill replaced.
My vent grill was broken. I used a screwdriver to remove the old grill and replaced the filter and grill. It was so easy. I am a 67 year old female and it was very easy to replace both.
0 of 1 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Arla from Puyallup, WA
- Parts Used:
- 8183948
- Difficulty Level:
- Very Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Screw drivers
Tabs holding vent to microwave oven broke.
Took out old screws, removed old vent - put in new vent. New tabs seem to be sturdier.
0 of 1 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Stephane from New York, NY
- Parts Used:
- 8183948
- Difficulty Level:
- Very Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Screw drivers
The grill vents lock tabs had broken off and the grill would not stay in place
Extremely easy installation if you note that there are four inline screws above the grill. Remove the two outside screws; partly unscrew the two inside screws; slot in the grille; retighten everything.
0 of 1 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- connie from ponte vedra beach, FL
- Parts Used:
- 8183948
- Difficulty Level:
- A Bit Difficult
- Total Repair Time:
- 15 - 30 mins
- Tools:
- Pliers, Screw drivers
First of there weren't any instructions to go with the part
The part was packaged well and shipped quickly. Once unwrapped, I found no instructions as to how to install the grill. The old grill fell off and then I found the screws were stripped. Luckily I had a small set of tools with me. It took me 15 minutes to remove the old screws at the top of the old grill mount. Once that was done it t
... Read more
ook me another five minutes to figure out how to get the new grill to snap into place so I could tighten it down. Without instructions, I was worried the plastic inserts would break off before it was set into place properly. Finally, I was able to maneuver it with a flat head screw driver so that it all snapped into place and then was able to use the old screws (new ones were not included in the packaging) and it held even though the old screws were somewhat stripped. It looks great but it was a frustrating 20 minutes! Suggestion: Tools needed are a small flat head for maneuvering, small Phillips for the screws, Pliers to hold the lock washers while trying to remove the old screws and a lot of patience!
Read less
0 of 1 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Anthony from Chicago, IL
- Parts Used:
- 8183948
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Screw drivers
The vent grill became brittle and the supporting pieces broke off.
Removed the old grill and installed the new one. It was a perfect fit.
0 of 1 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Cindy from Surprise, AZ
- Parts Used:
- 8183948
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Nutdriver
The grille vent tabs were broken
I used a step stool to reach the top of the grille with ease. I removed the broken tabs still in the holes. Lined up the grille vent with the tab slits. Screwed the two screws located at the top of the grille, and was done.
0 of 1 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Jim from MARION, NC
- Parts Used:
- 8183948
- Difficulty Level:
- A Bit Difficult
- Total Repair Time:
- Less than 15 mins
- Tools:
- Screw drivers
Plastic tabs on old grille had broken.
I had glued the old tabs a month ago, but they were too full of cracks, and the repair lasted just a few weeks. My wife was disappointed when I ordered the replacement grille, but it was cheaper than a new microwave. The installation was fairly easy. Had to bend and squeeze it a bit to get the part in position, and it took a little effort
... Read more
to get the mount aligned to install the screws that hold the grille in place. But everything was done in 10-12 minutes.
Read less
0 of 1 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Arthur from Gulfport, MS
- Parts Used:
- 8183948
- Difficulty Level:
- A Bit Difficult
- Total Repair Time:
- 15 - 30 mins
- Tools:
- Screw drivers
Cabinet extended out more than the depth of microwave; could not reach and remove screws holding damaged grille.
had to approx. measure location of screws underneath the cabinet and drilled 1/4 inch holes in bottom of cabinet from inside to allow me to remove the two screws. Then removed screws and old grille. Installed new grille with no difficulty. Patched holes in cabinet with wood filler. New grille absolutely fit perfect!! The grille arriv
... Read more
ed on the third day after ordering. Pretty reliable company I'd say. Thanks!!! Art
Read less
0 of 1 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Bill from Ocala, FL
- Parts Used:
- 8183948
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Pliers, Screw drivers
Mounting tabs on the vent grille were broken.
1. Remove the top mounting screws. 2. make sure all broken pieces are out of the mounting brackets & guide slots. 3. Straighten any bent brackets & bends in the case periphery. 4. Put the new grille in place making sure it lines up properly with the case. 5. Put the screws back in & tighten. EASY INSTRUCTIONS Take the old grille ou
... Read more
t. Put the new one in. Tighten the screws. Took less than 10 minutes, even straightening a couple of bent brackets.
Read less
0 of 1 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
- < Prev
- 1
- Next >
Model Compatibility
This part works with the following models:
Fix Number: FIX391973
Manufacturer Part Number: 8183948
Manufacturer Part Number: 8183948
Brand
Model Number
Description
✖
Mail-In Recycling Rebate
Some of the parts we sell are eligible for mail-in rebates since we can recycle them. We will display any applicable rebates in your shopping cart. To redeem your rebate, contact Customer Service after you have received your part.