Have you ever purchased from us before?
Thank you for helping make our site better.
Manufacturer #: 6800 /
Manufactured by: Whirlpool /
Fix #: FIX382960
Manufacturer #: 6800 |
Manufactured by: Whirlpool |
Fix #: FIX382960
My vent grill was broken. I used a screwdriver to remove the old grill and replaced the filter and grill. It was so easy. I am a 67 year old female and it was very easy to replace both.
Were these instructions helpful?
Removed existing grease filters following instructions in the operating manual. Extreme care is required as the filters are not much thicker than tin foil and will bend very easily. The tab that you use to pull or push on the grease filter during installation is not designed to be pulled down like a pop-top on a soft drink can. Rather just use your fingers to pull or push on it without trying to bend it down. Bending it down in order to grasp it better will easily ruin the outer aluminum frame which was the original problem. The charcoal filters go in very easily without any particular "trick" to the procedure described in the operating manual.
Replacement was super easy went perfect!
The old vent grille was already off so it was easy to place the new grille in place and tighten the screws. The only hard part about the filters was using the screwdriver to pry them a little in order to grab them to take out.
It was very easy and took less than 10 minutes. We should have done this years ago!
Slid grease filter to side and popped out then slid charcoal filter to rear and took screwdriver and popped down and out of channel. Pushed new charcoal filter into slots and slid grease filter into channel and pulled tab toward middle of frame to lock in place. Took 3 minutes to do. Very Easy
It was as easy as opening the packaging the parts came in.Really I replaced it so fast I couldn't believe it.And it looks brand new...Thank you
Does bread last longer in the fridge? Can you cut raw meat on woo…