The light socket in your microwave houses the light bulb and connects it to the power source. The light bulb will screw into it, so the light bulb will be held in place. Be very careful when installing this part, and be sure to consult your manual before you begin this repair.
The light socket in your microwave houses the light bulb and connects it to the power source. The light bulb will screw into it, so the light bulb will be held in place. Be very careful when installing this part, and be sure to consult your manual before you begin this repair.
Works with the following brands:
Whirlpool, Maytag, Amana, KitchenAid
Works with the following products:
Microwave, Microwave Oven Combo
Fixes the following symptoms:
Won’t turn on, Doesn’t shut off
Part# W10210871 replaces these:
AP4364465
Questions and Answers
Ask our experts a question about this part and we'll get back to you as soon as possible!
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched. Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
David
November 18, 2021
Light stop working. Removed bulb did not unplug. Pop noise, My mistake. Replace bulb, light stays on won't switch from high to low. Need help
For model number MMV1175jv0
Hello David, Thank you for the question. This indicates there was a power surge and a short and the Control Board, Fix Number: FIX12731106 may have bene damaged. We hope this helps!
removed 10screws dropped panel . while I was there I also replaced bulb socket probably did not need to but I felt more comfortable doing so , also felt safer to do this. don't forget even when replacing only a light bulb unplug power from unit for safety sake.
1 of 2 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Model Compatibility
This part works with the following models:
Fix Number: FIX2342199
Manufacturer Part Number: W10210871