See part 1417 in the diagram
( Grid squares measure 1x1 inch )
Synchronous Motor
$17.60
In Stock
Fix Number: FIX953598
Manufacturer #: WB26X10143
Manufactured by:
GE
-
Product Description
This motor rotates the glass turntable in the microwave.
-
Works with the following brandsGeneral Electric
-
Works with the following productsMicrowave
-
Fixes the following symptomsTray won’t turn, Noisy
-
Part Number Cross ReferencePart# WB26X10143 replaces these:AP3775270, 1086075, WB26X10157
Product Description
This motor rotates the glass turntable in the microwave.
-
Works with the following brands:General Electric
-
Works with the following products:Microwave
-
Fixes the following symptoms:Tray won’t turn, Noisy
-
Part# WB26X10143 replaces these:AP3775270, 1086075, WB26X10157
Questions and Answers
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Related PartsAdditional or alternate parts to consider.
Installation Instructions Provided by Fix customers like you.
- < Prev
- 1
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
-
Customer:Jessie from Lexington, NC
-
Parts Used:WB26X10143
-
Difficulty Level:Really Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Screw drivers
I melted the connection to the motor..
cut the cover...remove 2 screws..remove motor..replace new motor..All as per instructions someone else posted..however..replace cover and secure, no instructions on how to secure the cover..I used Duct tape...Works for me. By the way..I am a 76 year old female..If I can do this..anyone can.
Was this instruction helpful to you?
Thank you for voting!
-
Customer:Milton from Vernal, UT
-
Parts Used:WB26X10143
-
Difficulty Level:Very Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Screw drivers
Easy fix
Remove about 5 screws 4 from cover and one from synchronous motor mount,unplug cable, install new unit and reassemble
Was this instruction helpful to you?
Thank you for voting!
-
Customer:Ronald B from El Cajon, CA
-
Parts Used:WB26X10143
-
Difficulty Level:Very Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Socket set
Turntable stopped turning
Remove loose parts from inside the oven. Turn the oven over onto its top, bottom facing up. There is an inspection cover on the bottom, roughly 3"x 5". If the inspection cover on the bottom has not been previously removed, use the diagonal cutters to cut the small tabs between some of the holes (+/- 10) and remove the inspection cover taking note of its orientation. Remove the two Phillips screws holding the motor in place, and unplug the power connector. Connect the power connector to the replacement motor, and reinstall the two screws, do not over tighten. Rotate the inspection cover 180 degrees from factory position, remove the single screw that was next to the inspection cover, insert the two tabs on the inspection cover into the slots on the bottom of the oven, and reinstall the previously unused screw to secure the inspection cover that has been rotated 180 degrees. Takes a lot of words to explain this 5 minute repair.
Was this instruction helpful to you?
Thank you for voting!
-
Customer:george from Omaha, NE
-
Difficulty Level:Really Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Screw drivers
turntalble motor stopped working after wife boiled coffee over and it tracked down into motor
watched youtube video. it was easy to fix. small cut on finger from sharp metal housing-be careful
Was this instruction helpful to you?
Thank you for voting!
- < Prev
- 1
- Next >
★
Customer Reviews
Filter By Rating:
- < Prev
- 1
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
CHRIS V - October 27, 2021
Verified Purchase
Microwave Rotary motor replacement
Once you get the case off (which was relatively easy) and get to your motor, it was a very easy install.
- < Prev
- 1
- Next >
Model Compatibility
This part works with the following models:
Fix Number: FIX953598
Manufacturer Part Number: WB26X10143
Manufacturer Part Number: WB26X10143
Brand
Model Number
Description