Diode Cable WB27X10037
$30.75
In Stock
- Fix Number:
- FIX239148
- Manufacturer #:
- WB27X10037
- Manufactured by:
- GE
Jump to:
Product Description
-
Works with the following brands:General Electric, Kenmore, Hotpoint
-
Works with the following products:Microwave, Microwave Oven Combo, Wall Oven, Range
-
Fixes the following symptoms:No heat
-
Part# WB27X10037 replaces these:AP2025948, 769835, WB18X10286, WB27X1033, WB27X10330
- Works with the following brands:
- General Electric, Kenmore, Hotpoint
- Works with the following products
- Microwave, Microwave Oven Combo, Wall Oven, Range
- Fixes the following symptoms
- No heat
- Part# WB27X10037 replaces these:
- AP2025948, 769835, WB18X10286, WB27X1033, WB27X10330
Part Number Cross Reference
Questions and Answers
Be the first to ask our experts a question about this part!
✖
Ask a Question
Ask our experts a question on this part and we'll respond as soon as we can.
Sorry, we couldn't find a match for "".
Here's a guide for finding your model number.
Something went wrong. Please try again later.
Your Question Has Been Submitted!
Our experts will send you an email as soon as your question has been answered.
Related Parts Additional or alternate parts to consider.
View More
View Less
Installation Instructions Provided by Fix customers like you.
- < Prev
- 1
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
- Customer:
- Russell from Phenix City, AL
- Parts Used:
- WB27X10037
- Difficulty Level:
- Really Easy
- Total Repair Time:
- 15 - 30 mins
- Tools:
- Screw drivers
Microwave would not heat. Hummed louder than normal. Convection oven still worked.
Removed the cover. Located the diode on the lower back right corner attached to the capacitor. Discharged the capacitor using a voltmeter and then removed the diode by removing the screw attaching it to the case and pulling it out with needle nose pliers. Reversed the procedure with the new diode and put the cover back on. Plugged the m
... Read more
icrowave back in and tested that it was working fine by boiling a bowl of water.
Read less
2 of 2 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Thomas from Williamsport, PA
- Parts Used:
- WB27X10037
- Difficulty Level:
- Really Easy
- Total Repair Time:
- 15 - 30 mins
- Tools:
- Pliers, Screw drivers
Microwave runs but will not heat food
Unplug for 24hrs. Remove top vent cover. Remove control panel. Unplug connectors and set aside. Note of terminal where diode is plugged into the High voltage capacitor. Pull diode connector out of the capacitor. Unscrew other end of diode from the frame. Install new diode and assemble in reverse order. Plug in and wait 1hr for capacitor t
... Read more
o charge. Test oven by heating a cup of water.
Read less
2 of 2 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
- < Prev
- 1
- Next >
Model Compatibility
This part works with the following models:
Fix Number: FIX239148
Manufacturer Part Number: WB27X10037
Manufacturer Part Number: WB27X10037
Brand
Model Number
Description
✖
Mail-In Recycling Rebate
Some of the parts we sell are eligible for mail-in rebates since we can recycle them. We will display any applicable rebates in your shopping cart. To redeem your rebate, contact Customer Service after you have received your part.