16219547-1-M-GE-WB27X35382-DIODE-CABLE ASM

( Grid squares measure 1x1 inch )

DIODE-CABLE ASM

★★★★★

1 Review

Rated by 3 customers

Easy

1- 2 hours

Ratings submitted by customers like you who bought this part.

$6.74

Fix Number: FIX16219547

Manufacturer #: WB27X35382

Manufactured by: GE

Product Description

This part is the replacement high-voltage diode for your microwave. It is approximately 3 inches long and is sold individually. The high voltage diode is an electrical current control device inside your microwave. Be sure to disconnect power to the microwave, and use extreme caution when completing this repair, as microwaves can still retain an electrical charge even when unplugged. This part is an authentic OEM part sourced directly from the manufacturer.
Works with the following brands

General Electric
Works with the following products
Microwave, Range
Fixes the following symptoms

No heat
Part Number Cross Reference

Part# WB27X35382 replaces these:

WB18X10449, WB27X10892, WB27X10930, WB27X10965, WB27X11035

2 Related Parts Questions and Answers

3 Installation Instructions

1 Customer Review Model Compatibility

Product Description Questions and Answers Related Parts Installation Instructions Customer Reviews Model Compatibility

Product Description

This part is the replacement high-voltage diode for your microwave. It is approximately 3 inches long and is sold individually. The high voltage diode is an electrical current control device inside your microwave. Be sure to disconnect power to the microwave, and use extreme caution when completing this repair, as microwaves can still retain an electrical charge even when unplugged. This part is an authentic OEM part sourced directly from the manufacturer.

Works with the following brands:

General Electric
Works with the following products:
Microwave, Range
Fixes the following symptoms:

No heat
Part# WB27X35382 replaces these:

WB18X10449, WB27X10892, WB27X10930, WB27X10965, WB27X11035

Questions and Answers

We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.

Related PartsAdditional or alternate parts to consider.

Installation Instructions Provided by Fix customers like you.

Average Repair Rating: 2.7 / 5.0, 3 reviews.

< Prev
1
Next >

Sort by:

Customer:

Alan from Houston, TX
Parts Used:
WB27X11033, WB27X35382, WB27X10928
Difficulty Level:
A Bit Difficult
Total Repair Time:
1- 2 hours
Tools:
Screw drivers, Wrench set

would not heat ........all displays, lights, turntable seemed normal

opened the cabinet, tested the multiple switches for continuity...seemed OK.....the unit would run, but when the magnetron engaged - no heat...one of the fins on the magnetron had broken loose from its assembly....I first replaced the magnetron & still no heat.....I then replaced the capacitor & diode...and success..works fine.I purchase new sheet metal screws at bigbox to resecure the cabinet...the odd heads on the original ones wallowed out, even with the proper driver

8 of 8 people found this instruction helpful.

Was this instruction helpful to you?

Customer:

Stephen from ZACHARY, LA
Parts Used:
WB26X32629, WB27X35382
Difficulty Level:
Very Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers

Microwave was buzzing and humming loudly.

Removed trim kit from around the microwave then pulled it out of the wall. Removed the outer cover of the microwave. Located the diode, tested it then replaced it and the magnetron. All with a phillips head screwdriver. Took care of the problem.

2 of 2 people found this instruction helpful.

Was this instruction helpful to you?

Customer:

james from Framingham, MA
Parts Used:
WB27X35382
Difficulty Level:
A Bit Difficult
Total Repair Time:
More than 2 hours
Tools:
Screw drivers

Microwave was not heating the food.

You have to remove the Microwave from the cabinet over the stove then remove all the screws from the microwave's metal cabinet and slid it off. You must make sure that the capacitor has no voltage stored in it or you can electricut yourself. There are many video's on youtube showing how to do this. Changing the diode involve only two screws. So it's the easiest part of the job. IN MY CASE IT TURNED OUT THE DIODE WAS NOT THE PROBLEM. I NEEDED A NEW MAGNATRON. WHICH IS ALSO EASY TO REPLACE ONCE YOU'VE OPENED UP THE MICROWAVE AND DRAINED THE CAPACITOR.

1 person found this instruction helpful.

Was this instruction helpful to you?

< Prev
1
Next >

★ Customer Reviews

Average Rating: (1 Review)

5.0

★★★★★

Filter By Rating:

5★

1
4★

0
3★

0
2★

0
1★

0

< Prev
1
Next >

Sort by:

★★★★★

Verified Purchase

Diode testing and replacement

You can get online and find testing methods for diodes. Follow the testing instructions to verify your diode is working properly or needs replacing.

< Prev
1
Next >

Model Compatibility

This part works with the following models:

Fix Number: FIX16219547
Manufacturer Part Number: WB27X35382

General Electric

CSB912M2N1S5

Microwave Oven Combo

General Electric

CSB912P2N1S1

Microwave

General Electric

CSB912P2N2S1