953501-1-M-GE-WB23T10020 -SENSOR Assembly

( Grid squares measure 1x1 inch )

953501-1-S-GE-WB23T10020 -SENSOR Assembly

953501-2-S-GE-WB23T10020 -SENSOR Assembly

953501-3-S-GE-WB23T10020 -SENSOR Assembly

SENSOR Assembly WB23T10020

$25.12

Fix Number:: FIX953501
Manufacturer #:: WB23T10020
Manufactured by:: GE

Works with the following brands:: General Electric, Kenmore
Works with the following products: Microwave Oven Combo, Wall Oven, Range

6 Related Parts 2 Questions and Answers

Product Description Questions and Answers Related Parts Model Compatibility

Product Description

Works with the following brands:

General Electric, Kenmore
Works with the following products:
Microwave Oven Combo, Wall Oven, Range

Questions and Answers

We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.

2 questions answered by our experts.

< Prev
1
Next >

Sort by:

Mark

November 5, 2021

Where is the sensor located? Do I have to take the oven out?

For model number JT930BOH1BB

Hello Mark, thank you for your great question. You will need to access the rear of the unit. The sensor will be in plain view connected to a wiring harness by a plastic tab. The sensor itself needs to be accessed by unscrewing the two screws you see holding it. With the two screws removed, unclick the plastic tab to separate the sensor from the harness. Pull out the sensor. Replace with new sensor carefully not to disturb any insulation. Re screw the two screws and re attach the sensor and harness by clicking the plastic tab together. Good luck with your repair.

1 person found this helpful.

Was this helpful?

Mark

November 5, 2021

My oven is clicking and takes a long time to heat up. Could this fix the problem.

For model number JT930BH1BB

Hello Mark, Thank you for the question. We suggest testing the Sensor. Testing the temperature sensor probe on your oven is easy. With the sensor at room temperature, measure the resistance between the two prongs at the end of the sensor connector. The resistance of the sensor should read approximately 1080 – 1090 ohms at room temperature. We hope this helps!

Was this helpful?