18285056-1-M-Ego-3705938001-Blade
Part Location Diagram of 3705938001 Ego Blade
See part 29 in the diagram
( Grid squares measure 1x1 inch )
18285056-1-S-Ego-3705938001-Blade 18285056-2-S-Ego-3705938001-Blade 18285056-3-S-Ego-3705938001-Blade Part Location Diagram of 3705938001 Ego Blade

Blade 3705938001

$ 18.58
No Longer Available

No Longer Available

Sorry, this part is No Longer Available at Fix.com, which means:

  • The part is no longer sold by the manufacturer.
  • The manufacturer does not stock any substitute parts to replace this one and therefore, unfortunately, we cannot obtain or recommend a substitution for this part.
  • We cannot obtain the part through any other means.

Our call center and online agents are, unfortunately, unable to help you locate this part, but you may still be able to find the part elsewhere. We recommend:

  • Typing your part number into a search engine and checking to see whether another company might stock it.
  • Searching online stores like eBay for your part number.
  • Visiting a local appliance store or parts dealer to see if they have this part in stock.
  • Contacting a local technician, who may be able to repair your existing part or replace it with their own solution.
  • Contacting the manufacturer of your appliance directly to check for their recommendations.
Fix Number:
FIX18285056
Manufacturer #:
3705938001
Manufactured by:
Ego

Product Description

This is a 21-Inch OEM blade for your lawn mower. Sold individually. The blade should be regularly inspected for damage, such as bending, cracking and wear. To ensure the best and safest performance from your blade, it needs to be kept sharp and clean. When installing your new blade, start by mounting the inner flange to the fan. Mount the fan and the inner flange onto the motor shaft with the fan blade facing the deck. Position the blade on the inner flange with the surface that reads ?this side facing grass? facing towards the outside. Align the outer flange with the shaft and assemble it in place. Mount the bolt into the shaft and turn it clockwise by hand to pre-tighten it. Hold the blade with one hand (while wearing a glove) and turn the fan with the other hand to align the holes in the blade with the holes in the inner flange. Place a metal rod with the diameter less than 5/16-inches into the fixing hole to keep it in place. Use a 9/16-Inch torque wrench to tighten the bolt clockwise. The recommended torque for the blade bolt is 49-59Nm.

  • Works with the following brands:
    Ego
  • Works with the following products:
    Lawn Mower