Trimmer Tanks and Containers

Fix Number

FIX9118299

Manufacturer Part Number

753-06183

This is an authentically sourced fuel tank assembly, including the fuel lines, fuel cap, fuel filter, and screws needed for assembly. This fuel tank assembly is for trimmers, and is where the fuel is filtered and stored for use with the engine. Due to its constant contact with fuel, especially if fuel has been left it in for extended periods of time, it may crack, in which case it should be replaced immediately. Leaking gas is very dangerous, so it is important that it get fixed quickly. Before beginning this repair, drain the gas from the tank before installing the new one.

Fix Number

FIX9118306

Manufacturer Part Number

753-06250

This is a genuine part that is supplied by the original manufacturer for use with Craftsman trimmers. The fuel tank stores the gasoline used to power the trimmer. This part is made of plastic and is sold individually. The fuel cap and fuel lines are all included in this kit. For this repair, you will need a screwdriver to remove any panels or covers, a pair of needle nose pliers, and a socket wrench to aid you.

Fix Number

FIX12646115

Manufacturer Part Number

581263701

This genuine fuel tank assembly is an original replacement part sourced directly from the manufacturer and is commonly used in Craftsman trimmers and weedwackers. Made from high-quality plastic for durability, it includes the attached fuel tank cap for a secure seal. Replacing this part may require an Allen wrench or hex key, depending on your model. The fuel tank assembly is sold individually and is designed to meet OEM standards for fit and performance.

Fix Number

FIX19283368

Manufacturer Part Number

753-06240

This is an authentic fuel tank assembly for a trimmer. This assembly includes the fuel tank, fuel lines, and a fuel cap. Please note that the tabs used to secure the tank are sold separately. Replacing this fuel tank assembly will solve a leaking fuel tank, deteriorated fuel lines, or a broken fuel cap. If your fuel tank is leaking, this assembly should solve the issue. Never run your equipment with a damaged fuel tank, as this is unsafe. Before making this repair, be sure to drain the gas tank.

★★★★★

★★★★★

1 Review

Fix Number

FIX11812933

Manufacturer Part Number

753-06797

This is an authentic part that is supplied directly from the original equipment manufacturer for Craftsman trimmers. The fuel tank houses the fuel used to power the machine. This part is made of hard plastic and is sold individually. The fuel cap and fuel lines are included in the assembly. For installation you will need a screw driver to remove and shrouds and covers.

★★★★★

★★★★★

1 Review

Fix Number

FIX9119304

Manufacturer Part Number

753-06240

This is an authentic fuel tank assembly for a trimmer. This assembly includes the fuel tank, fuel lines, and a fuel cap. Please note that the tabs used to secure the tank are sold separately. Replacing this fuel tank assembly will solve a leaking fuel tank, deteriorated fuel lines, or a broken fuel cap. If your fuel tank is leaking, this assembly should solve the issue. Never run your equipment with a damaged fuel tank, as this is unsafe. Before making this repair, be sure to drain the gas tank.

Fix Number

FIX17016321

Manufacturer Part Number

A038000431

This replacement fuel tank assembly is a high quality item that is specially produced for Shindaiwa lawn and garden equipment. It is designed to hold the fuel that is needed for the internal combustion engine. It is made from durable plastic and it includes the fuel tank, fuel lines with a fuel filter and the cap. Please note hardware to secure this fuel tank is not included it is sold separately.

Fix Number

FIX9178862

Manufacturer Part Number

A350000780

This high quality OEM sourced replacement fuel tank is specially made for use with Echo gas powered string trimmers and brush cutters. It is used to hold the fuel that is needed for the engine. One durable plastic tank is included per order, please note the cap, fuel lines and the hardware to secure the tank are all sold separately.

Fix Number

FIX9029852

Manufacturer Part Number

545180870

This is a high quality OEM supplied replacement fuel tank that is designed for Husqvarna trimmers, edgers and brush cutters. This assembly is made from durable plastic and it includes the tank, fuel lines, fuel filter, fuel cap with a retainer and the isolator pads. Its purpose is to hold the fuel that is used by the engine. You will need a torx screwdriver to complete this repair.

Fix Number

FIX9183118

Manufacturer Part Number

A350001220

This is an original Shindaiwa replacement part manufactured for use with trimmers, and brush cutters. This hard plastic fuel tank is the fix for damage or cracks to the original fuel tank. Replacing just the tank is less expensive than replacing the whole assembly. The tank does not include the lid or bumpers, and is sold individually.