Trimmer Engines

★★★★★

★★★★★

1 Review

Fix Number

FIX9314032

Manufacturer Part Number

A356000040

This is a breather for your lawn equipment. The breather allows air to enter the fuel tank, but will not let the fuel or emissions escape. It is essentially a valve for your tank. This part is connected to the fuel line, and is made of plastic. Eventually this part will wear, depending on your usage. When that happens, you should replace it to avoid fuel and fuel emissions from leaking out of your machine.

Fix Number

FIX16365562

Manufacturer Part Number

545154009

This replacement piston ring is a high quality item that is sourced from original equipment manufacturer for use on Craftsman gas powered lawn and garden equipment. A worn or broken piston ring will allow combustion gases to escape the seal and enter the crankcase causing low compression and the loss of power. If compression is reduced significantly, the engine will not be able to run at all. Please note one durable metal piston ring is included per order requiring a wrench set and pliers to complete the repair.

Fix Number

FIX9315673

Manufacturer Part Number

C504000500

59" long and is 1/4 of an inch diameter.

Fix Number

FIX9030152

Manufacturer Part Number

545008082

This is a genuine OEM replacement part used with several lawn trimmer devices. The piston/cylinder kit is composed of metal and plastic, and is fitted between the crankshaft assembly and the gasket foam kit. It is recommended to refer to engine manual and diagrams for further instruction. The piston/cylinder kit is sold individually. To complete the repair, you will need a screwdriver, pair of pliers and a socket set.

Fix Number

FIX9177819

Manufacturer Part Number

A101000000

This piston ring is an authentic manufacturer approved replacement part. Is is commonly used on Echo gas trimmers/edgers. The purpose of a piston ring is to create an air tight seal inside the cylinder. A worn or broken piston ring will allow combustion gases to escape the seal and enter the crankcase. This would cause low compression and a loss of power. Replacing an o-ring should resolve this issue. This part is made out of metal and is sold individually. To complete this repair you will need a set of wrenches, pliers and a screwdriver. • Remove the air cleaner • Drain the fuel • Remove the air cleaner case • Remove the carburetor • Remove the intake insulator • Remove the spark plug • Remove the engine cover • Remove the insulator gasket • Remove the starter assembly • Remove the fuel tank • Remove the air duct • Separate the engine • Bind the engine • Remove the clutch • Remove the flywheel • Remove the starter pulley • Unbind the engine • Remove the muffler • Separate the cylinder from the crankcase • Remove the piston ring • Install the piston ring • Reassemble and test the equipment

Fix Number

FIX9981233

Manufacturer Part Number

575227901

This genuine manufacturer sourced replacement part is specially made for use with a variety of handheld lawn and garden equipment. This part is installed on top of the piston/connecting rod. Its purpose is to create a seal in the cylinder so that it can build pressure. A worn or broken piston ring will allow combustion gases to escape the seal and enter the crankcase, causing low compression and a loss of power. If compression is reduced significantly, the engine will not run at all. Includes one (1) metal piston ring. Tools Required: Receptacle for draining fuel, Torx wrenches, spark plug wrench, 10mm wrench (or adjustable), long-nosed pliers, rubber mallet, standard screwdriver, old starter rope (or similar cord), adjustable pliers, 2-cycle engine oil, razor blade, ignition gapping gauge. • Remove the air cleaner • Drain the fuel • Remove the air cleaner case • Remove the carburetor • Remove the intake insulator • Remove the spark plug • Remove the engine cover • Remove the insulator gasket • Remove the starter assembly • Remove the fuel tank • Remove the air duct • Separate the engine • Bind the engine • Remove the clutch • Remove the flywheel • Remove the starter pulley • Unbind the engine • Remove the muffler • Separate the cylinder from the crankcase • Remove the piston ring • Install the piston ring

★★★★★

★★★★★

1 Review

Fix Number

FIX16365561

Manufacturer Part Number

545154001

This is an authentic OEM sourced replacement piston ring used on gas Trimmers and blowers. A worn or broken piston ring will allow combustion gases to escape the seal and enter the crankcase, causing low compression and a loss of power. If compression is reduced significantly, the engine will not run at all. This part is made out of metal and is sold individually. To complete this repair you will need a set of wrenches, pliers and a screwdriver.

Fix Number

FIX9891389

Manufacturer Part Number

14069-0013

This is a genuine OEM sourced replacement part designed for use with Kawasaki trimmers/edgers. This breather acts as a valve for the fuel tank, it allows for the air to enter the fuel tank but it won\'t allow fuel or fuel emissions to leave the tank. It is made out of plastic and it is sold individually. No special tools are needed to replace this breather, simply place it under the gas cap.

Fix Number

FIX9179622

Manufacturer Part Number

A101000010

This is an original Echo replacement part manufactured for use with outdoor power equipment. The piston ring is used to form a seal between the crankcase, and cylinder. Wear can occur on piston rings from dirt in the cylinder or lack of oil. A worn ring can cause damage to the cylinder, piston, and can lead to a lack of compression when the seal is broken. This piston ring is sold individually.

Fix Number

FIX9321825

Manufacturer Part Number

P021007712

This is a genuine OEM sourced replacement part that has been sourced from the original manufacturer to be used with trimmers, hedge clippers, pruners, edgers, and blowers. The piston fits inside the cylinder and links with the connecting rod. The piston is used to separate the combustion chamber and the crankcase. The piston moves up and down inside the cylinder during the ignition sequence and this action drives the crankshaft. This kit includes the piston, ring, clips, and pin.