Trimmer Bearings

Fix Number

FIX9285698

Manufacturer Part Number

532110485

This is a single mandrel ball bearing for a mower. It is sold individually, however it is a good idea to have a couple of these on hand. This bearing is located on top of the shaft, which is part of the mandrel assembly. The mandrel assembly is bolted to the more deck. This bearing measures roughly 1-3/8-Inches inner diameter, 1.578-Inches outer diameter, and .475-Inches long.

★★★★★

★★★★★

1 Review

Fix Number

FIX10180918

Manufacturer Part Number

605040-65

If your tool is making a squeaking or squealing sound, a worn bearing is a likely cause. Bearings are designed to lessen the friction between moving parts, so they are prone to deterioration over the life of your equipment. This part includes one OEM ball bearing which is sealed on both sides. Installation may vary depending on the model-type, but in general, this should be a quick and easy repair that can be easily done yourself.

Fix Number

FIX12396288

Manufacturer Part Number

093128-00

Included in part number 611971-00

Fix Number

FIX10141520

Manufacturer Part Number

211031-6

Included in Part Number 516306-1. rnThis Ball Bearing is sealed on both sides. This genuine Makita replacement part is sold individually. rnrn • Ball bearings minimize friction between rotating parts in your tool. The balls or rollers bear the load and spin, distributing the weight evenly, while the minimal contact area of the balls reduces friction. This reduces wear on the tool, allowing it to run smoothly. rn • Bearings experience constant wear when the tool is in operation from pressure, heat, vibration and friction. Because of this, many Bearings need periodic maintenance or replacement.

Fix Number

FIX10141492

Manufacturer Part Number

210059-1

This authentic replacement part which is specially designed for use with Makita power tools. Ball bearings are used to reduce friction between rotating parts, over time components may begin to wear out and fail eventually requiring a replacement. Please note this high-quality ball bearing is made of durable metal and it is sold individually.

Fix Number

FIX18988820

Manufacturer Part Number

90585664

This is a genuine OEM part. The bearing housing is made for use with the Black and Decker GH3000 Type 1 High Performance 7.5A 14" Electric String Trimmer. This protective item is constructed of durable plastic, and is fitted over the wheel and spool housing components. The bearing housing is sold individually. A hex key and pliers may be required for the repair.

Fix Number

FIX10141558

Manufacturer Part Number

211129-9

This is an authentic Makita replacement part manufactured for use with angle grinders and circular saws. The sealed bearing is used to reduce friction between a rotating shaft and fixed housing or assembly. This bearing is often used to allow the spindle to rotate inside the gear box, but may have other uses. Please see model diagram for part location and usage. This bearing is sold individually.

Fix Number

FIX12497015

Manufacturer Part Number

874538SV

This is a genuine OEM replacement part, it is sold individually. This Ball Bearing is sealed on both sides. • Ball bearings are used to reduce friction between rotating parts. The balls or rollers take the load and spin, distributing the weight evenly while the minimal contact area of the ball reduces friction. • This reduces wear on the tool and allows it to run smoothly. • Bearings experience constant wear when the tool is in operation from pressure, heat, vibration and friction. Because of this, many Bearings need periodic maintenance or replacement.

Fix Number

FIX9012781

Manufacturer Part Number

532172516

This is an authentic OEM part for use with Husqvarna, Poulan, Weed Eater and Jonsered Trimmers. The Spindle bearing cover attaches above the mow ball bearing to prevent dust and debris from entering the upper bearing. This part is sold individually. The tool that you will need to replace the bearing cover is a socket set.

Fix Number

FIX10141514

Manufacturer Part Number

211021-9

This replacement ball bearing is an authentic Makita item. It is supplied directly from original equipment manufacturer for use with angle grinders. Please check diagrams for proper application of this item. The bearing is specially designed to reduce friction between rotating parts. Over time it will wear out and will need to be replaced. This is a sealed metal bearing and it is sold individually. Included in part number 515616-3