Yard Machines Tiller Parts
Start With Your Model Number
Find Parts Fast
Guaranteed Fit
Repair Videos
Need help finding your model number?

Popular Yard Machines Tiller Parts
Nut, Flange Lock, 5/16-18, Grf
Most important, get the correct OEM parts from FIX.com. Refer to product parts list in model instruction manual.
Do that first and you too can see how easy this repair is and save big bucks charged by retail repair shop! Read more...
Fix Number FIX9092936
Manufacturer Part Number 712-04063
This nut is fit for lawn and garden equipment and is used to resist loosening when properly threaded onto a bolt. The nut is sold individually. The diameter of the nut is 5/16 inches and the thread size is 18. Refer to the manual provided by the manufacturer for repair instructions.
Installation Instructions
Ronald from SPEARFISH, SD
Replace sheave plate and side skid shoes on snowblower.
Remove eight bolts and two skid shoes and bottom sheave plate. Replace in reverse order.Most important, get the correct OEM parts from FIX.com. Refer to product parts list in model instruction manual.
Do that first and you too can see how easy this repair is and save big bucks charged by retail repair shop! Read more...
Nut, Flange Lock, 1/4-20, Grf
Fix Number FIX9299574
Manufacturer Part Number 712-04064
This is a flange lock nut, and it is used with various outdoor tools and equipment. The flange lock nut is all one piece. It has a bottom circular flange and a smaller top hex section. This is a torque type lock nut, and it has no temperature or chemical restrictions. This part has a 1/4-inch diameter and 20 thread size.
Washer-Lock 5/16
Fix Number FIX9311087
Manufacturer Part Number 936-0119
This lock washer is used to resist the loosening of bolted joints. Repair tip: It is difficult to install the lock washer in a tight place or when the bolt/screw is pointing down. This lock works with the following appliances: Lawn tractor, tiller, chipper, shredder, lawn mower, snow blower, leaf blower/vacuum, log splitter, edger, hedge trimmer, and engine. Refer to the manual provided by the manufacturer for repair instructions.
Nut, Flange Lock, 3/8-16, Grf
Fix Number FIX9095080
Manufacturer Part Number 712-04065
This lock nut is used for lawn and garden equipment, and is sold individually. This nut resists loosening when it is correctly threaded onto a bolt in your tool. The measurements are: the diameter of the bolt hole is 3/8 inches and the thread count is 16. For instructions on where the lock nut is located in your tool refer to the manual provided by the manufacturer.
Star Knob 5/16-18
Fix Number FIX9109078
Manufacturer Part Number 720-04072A
This star knob specifically fits a variety of lawn mowers and is used to secure both the lower and upper handles of your lawn mower. If your knob is worn out or loose, then replacing it will solve your problem. No tools are required for this repair. For installation instructions and more information on the part, refer to the manual provided by the manufacturer. This knob is secured with a carriage bolt, which is sold separately. *Please note: this knob is sold separately as well.
Bell. Wash. .340 I.D. x .872 O.D.
Fix Number FIX10006541
Manufacturer Part Number 736-0242
This is a Belleville washer, and it is used with various lawn and garden equipment around your home. This part has an inner diameter of 0.340 inches and an outer diameter of 0.872 inches. The convex shape of the Belleville washer acts like a spring, which is why they are often used in high load bearing situations.
Pin, Cotter .08 X 1.56 Intern. Right Hand
Step2. clean off shaft and slide tine back into position.
Step3. Insert clevis pin through holes and clip in place with cotter pin.
Step4. Put side cover back in place and tighten wingnuts. Read more...
Fix Number FIX9094228
Manufacturer Part Number 714-04043
Installation Instructions
Paul from LEBANON, PA
clevis pin had come out of rototiller tines and tine came off.
Step1. remove side cover of rototiller tinesStep2. clean off shaft and slide tine back into position.
Step3. Insert clevis pin through holes and clip in place with cotter pin.
Step4. Put side cover back in place and tighten wingnuts. Read more...
Appliance Type
Popular Yard Machines Tiller Models
- 400 ((21AA40M8700)(2016)) Tiller
- 21AA413H729 Yard Machines Tiller Model 21AA413H729 Parts
- 21AA404B000 (2010) Walk Behind Tiller
- 21AA404B000 (2011) Walk Behind Tiller
- 21AA40M1052 (2011) Walk Behind Tiller
- 21AA40M1052 (2010) Walk Behind Tiller
- 21AA40M7752 ((2015)) Tiller
- 21AA40M7752 ((2017)) Tiller
- 21AA40M7752 ((2014)) Yard Machines Tiller Model 21AA40M7752/2014 Parts
- 21AA40M7752 ((2016)) Tiller
- 21AA40M7752 ((2012)) Yard Machines Tiller Model 21AA40M7752/2012 Parts
- 21A332B062 (300) Front Tine Tiller
- 21A332B062 (330) Front Tine Tiller
- 21AA413A352 Yard Machines Tiller Model 21AA413A352 Parts
- 121R ((21A-121R700)(2004)) Tiller
- 95220 ((1991)) Yard Machines Tiller Model 95220/1991 Parts
- 95220 ((1992)) Yard Machines Tiller Model 95220/1992 Parts
- 120R ((21B-120R000)) Tiller
- 120R ((21A-120R000)) Tiller
- 120R ((21C-120R000)(2003)) Tiller